Duct insulation in Al Sahil, Jeddah
In Al Sahil, south Jeddah, the residential blocks, hotels and malls rely on complex central ductwork, and coastal humidity makes bare duct sweat constantly. Alrabih's team wraps the duct in glass-wool insulation and seals every joint with a vapour barrier, so condensation stops and cold air reaches each room without losing cooling along the run.
4.9 on Google- Glass-wool wrap
- Vapour seal
- No condensation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When duct insulation becomes urgent
- 1
Damp patches on the false ceiling
Damp stains or drips under the false ceiling in summer usually mean cold duct with no proper insulation. Humid air touches the cold metal, condenses, falls onto the ceiling boards and ruins the plaster and paint.
- 2
Old, cracked or loose insulation
Insulation that has cracked, pulled away from the metal or been soaked by a past leak no longer stops vapour. Even a small gap between two sections is enough for moisture to condense on the metal and restart the dripping problem.
- 3
New duct you want fully insulated
When new air ducts are installed in a home or commercial building, insulation is part of the work, not an afterthought. We wrap the duct and seal the joints before the ceiling is closed so it never needs to be opened again for this reason.
Who it's for
Noticing damp patches on your room ceiling
We survey the duct, wrap it in glass-wool and seal every joint so condensation stops completely.
Ask on WhatsAppInstalling new duct in a commercial building
We wrap the duct in glass-wool and seal all joints before the ceiling closes, with a one-year warranty.
Ask on WhatsApp
What the job covers
What the insulation work covers
- Duct route and insulation survey
- Glass-wool wrap over duct
- Vapour-sealed joints and corners
- Plenum box and connections insulated
- Fixed with correct fasteners
How we work
How we work
- 1
Ceiling and duct survey
The technician inspects the duct route and any existing insulation, then marks the sections that need new wrapping or re-insulation before work begins.
- 2
Surface prep and strip-out
Damaged or wet insulation is stripped off and the metal surface cleaned so the new material bonds properly with no air pockets trapped beneath.
- 3
Wrap and seal
We wrap the duct in glass-wool and cover every joint, corner and connection with the correct vapour barrier, using Foster, Armaflex or Kimmco sealing materials as the site requires.
- 4
Check and handover
The technician checks the insulation along the full route, confirms the wrap is secure and joints are gap-free, then hands over the completed work with a one-year warranty and competitive prices.
Why Alrabih?
Sealed insulation or a surface cover?
| Alrabih | The usual way | |
|---|---|---|
| Vapour barrier | Sealed at every joint and corner | Left open or incomplete |
| Joins between sections | Closed with correct sealant | Tape that peels off |
| Plenum box and connections | Insulated with the rest | Sometimes left bare |
| Drips after fitting | Stops when sealing is correct | Returns within weeks |
| Sheet material | G90 galvanized sheet from SABIC | Sheet of unspecified grade |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Sahil is a relatively modern district with tall buildings, hotels and commercial malls running complex central AC systems with long duct runs through false ceilings. The coastal location close to the sea lifts humidity, so bare duct sweats constantly, dripping water on the false ceiling and staining the interior finishes. Glass-wool insulation with a vapour barrier is essential here to protect the false ceilings and interior materials from moisture and salt air.
Al Sahil is in south Jeddah, a modern district of tall commercial and residential buildings and malls, close to the beach.
Most systems here are central AC with return and supply ductwork, with false ceilings that need protection from constant coastal condensation.
The AC setup in Al Sahil
- 1
Supply and return ductwork with false ceilings
Most hotels and malls here have separate supply duct to the rooms and return ductwork from the spaces, each needing independent glass-wool wrapping.
- 2
Plenum boxes and dampers in the false ceiling space
The plenum box and dampers mounted in the false ceiling need glass-wool insulation with tight sealing to stop sweating and dripping.
- 3
Flexible duct connections from the main duct to outlets
The flexible duct connections joining the main duct to the air outlets in walls and ceiling also need glass-wool insulation with a complete vapour barrier.
Before the visit
Before our visit in Al Sahil
- 1
Clarify the duct layout and components
Tell us the location of the ductwork in the false ceiling, and the number of plenum boxes, dampers and flexible connections before we visit.
- 2
Ensure access to the false ceiling space
Check that our team can easily access the false ceiling space, ductwork and copper lines through existing openings or ones that can be made temporarily.
- 3
Coordinate with other contractors if work runs in parallel
If other work is happening in the false ceiling or near the ductwork, tell us the schedule so we can plan the insulation work to fit with the timeline.
More districts for Duct insulation
Other services in Al Sahil
FAQ
Questions about Duct insulation
Why does duct sweat more in Jeddah than in other places?
Jeddah combines intense heat with high humidity, especially near the coast. Cold air inside the duct chills the metal, and the warm humid air outside condenses on it immediately if there is no insulation keeping vapour away from the metal surface.
Can duct be insulated after the false ceiling is closed?
It depends on the size of existing access hatches and the duct route. In some areas the work can be done through the hatches already there; in others a section of ceiling needs to be opened. The survey decides the right approach before any work starts.
What is the difference between Armaflex, Kimmco and Foster for duct insulation?
Armaflex and Kimmco are flexible insulation materials used for wrapping duct and reducing condensation. Foster is a sealant applied to joints and connections to block vapour from passing through. We choose the right material for each part of the duct after the site survey, and may use more than one on a single project.
Do you insulate duct in commercial and industrial projects too?
Yes, we work in residential, commercial, industrial and government buildings across all Jeddah districts. Project size affects quantities and coordination with other trades, which the survey maps out. Discounts by quantity and project size apply to larger works.
Does the plenum box need different insulation from the rest of the duct?
The plenum box has a larger surface area and cools quickly in Jeddah's humid air, making it especially prone to condensation. The technician wraps it in glass-wool and seals its corners and openings with the correct vapour barrier. The sealant chosen may differ from the one used on the rest of the duct route, depending on what the survey finds.
Does glass insulation protect the duct from sweating on to the false ceiling?
Yes, the glass-wool insulation with a vapour barrier stops condensation forming on the duct's outer surface, so no water drips on to the false ceiling below.
Cold air loses its cooling over the long duct run, how does insulation help?
Glass-wool insulation reduces the heat loss through the duct walls during the long run, so the cold air reaches the air outlets at full strength without loss along the way.
Does the salt in coastal air affect the glass-wool insulation?
The vapour barrier we seal at every joint protects the glass-wool from moisture and salt spray, keeping it effective long-term in the coastal environment.
How do you fix the duct joints after insulation?
We seal every joint and corner tightly with a vapour barrier before covering it with glass-wool, ensuring full airtightness and keeping out air leaks and moisture.


























































































