Electro-mechanical works in Hail, Hail Region
Electro-mechanical works in Hail supply the electrical runs, pipework, pumps, fans and automation needed for HVAC systems in villas, schools, government buildings and warehouses. They require precise coordination with the site management and other trades on site.
4.9 on Google- Power panels
- Control automation
- Site coordination
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When these works are needed
- 1
A new central HVAC project
In commercial, government and industrial buildings, fitting units and ducts is not enough. You need electrical runs sized for the loads, a control panel that starts and stops equipment in the right order, and pumps and pipework designed for the building.
- 2
Extending an existing HVAC system
Adding units or new control zones means extra load on the panel and new control cabling. We review the available capacity on site and define what the extension needs before any work starts.
- 3
Electrical faults stopping the equipment
A unit that will not start despite being in good order, a pump that burns out repeatedly, breakers tripping for no clear reason: these are usually a wiring or panel problem, not a fault in the equipment, and need diagnosis from a technician who understands both sides.
Who it's for
Building a new commercial or government project
We review drawings with the main contractor and take on power panels, electrical runs, control automation, pumps and ventilation from start to handover.
Ask on WhatsAppYour HVAC equipment keeps breaking down
We diagnose the electrical and mechanical side of the system and identify whether the fault is in the panel, the wiring or the control circuits before any work begins.
Ask on WhatsApp
What the job covers
What the works cover
- Power panels and load distribution
- Electrical runs for HVAC
- Automation and control circuits
- Pumps and pipework installation
- Ventilation and exhaust fans
How we work
How we work
- 1
Review project drawings
We go through the electrical and mechanical drawings with the designer or main contractor and define the power requirements and cable routes before any materials are prepared.
- 2
Site coordination
Electro-mechanical works cross paths with civil works and finishes. We follow the site programme and agree the sequence with other contractors so no trade is held up by a clash.
- 3
Run cables and fit equipment
We pull cables, mount panels, pumps and ventilation fans, then wire the control and automation circuits according to the approved site drawings.
- 4
Coordinated testing and start-up
We test each circuit individually then run the full system together with the AC equipment, checking that automation starts and stops everything in the right order before handover.
Why Alrabih?
Planned coordination or clashes that delay the project?
| Alrabih | The usual way | |
|---|---|---|
| Electrical panel | Sized for the actual load | Rough sizing causes problems later |
| Control wiring | Documented to drawings | Run without documentation |
| Site coordination | Followed with every trade | Each trade works in isolation |
| Start-up test | Full test before handover | Faults found after handover |
| Change documentation | Recorded at handover | Verbal changes, no record |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Electro-mechanical works in cities near Hail
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Hail
What sets this city apart
Hail, nestled between the Aja and Salma mountains, is home to residential villas, urban clusters, government buildings, schools and agricultural warehouses. In schools and government buildings electrical runs and pipework need careful planning to ensure AC and ventilation reach every classroom and office. Agricultural and commercial warehouses may need stronger pumps and longer runs, chosen to withstand continuous duty and heavy loads.
Hail is a northern city between the Aja and Salma mountains, with hot dry summers, cold winters and occasional strong winds.
Hail schools and government buildings commonly use multiple HVAC units with centralised control panels and separate electrical and pipe runs for each building section.
The AC setup in Hail
- 1
Separate runs for each building section
Large schools and government buildings in Hail need separate electrical and pipe runs for each section, with individual control panels for independent operation.
- 2
Strong circulation pumps and fans
Warehouses and schools need strong pumps and ventilation to cover large areas and ensure even air distribution across all zones.
- 3
Reliable centralised control panels
Centralised control panels for schools and government buildings are installed in a secure location away from interference, with safe and reliable control wiring.
Before the visit
Before our visit in Hail
- 1
Gather complete and approved plans
Send the electrical and mechanical plans approved by the authorities before the visit so we can map the runs and pumps accurately.
- 2
Confirm equipment and control room locations
Agree the locations of plant rooms and control rooms with the site engineer, as this decides the length of runs and distances between sections.
- 3
Schedule with site management and departments
Tell us suitable working times that fit with the school's or building's operations, so we do not disrupt teaching or work during installation and testing.
Other services in Hail
FAQ
Questions about Electro-mechanical works
Can you handle the electro-mechanical works when there is already another civil contractor on site?
Yes. We work as a specialist subcontractor alongside the main contractor, coordinating cable routes, pipework and equipment positions with the other trades on site. Before work begins, we identify where our scope crosses the civil and structural work and agree on the sequence of installation to avoid clashes.
What is the difference between the power circuit and the control circuit in an HVAC project?
The power circuit carries current from the panel to the compressor, motor or fan; cable size is set by the load. The control circuit carries low-voltage signals between sensors, thermostats and the controller; it issues run, stop and modulation commands. A fault in either circuit disables the whole system, so each is routed and terminated independently.
Does your work include connecting the automation system to a building management network?
Yes, when a building management network is already present on site. We connect the HVAC control units to the designated interface points and test signal exchange between the two sides. Protocol details and configuration are agreed with the team responsible for the building management network before installation begins.
How do you handle a clash between cable routes and ducts or pipework?
We identify clashes at the planning stage before installation starts, then consult the relevant trades to agree on an alternative route. If a site resolution is not possible, the clash is escalated to the project supervisor for a decision. Priority is always given to keeping the correct bending radius for cables and the required fall on condensate drain pipes, as compromising either affects system performance.
How do you handle a clash between cable routes and ducts or pipework?
Clashes between cable routes, ducts and pipework are common on medium and large projects. We identify them during the drawing review stage, before any trenching or pulling begins, and agree an alternative route with the trades involved. Changing a route on paper is far simpler than reworking it on site.
Do you install electro-mechanical works in schools and government buildings in Hail?
Yes. We install electrical runs, pipework, pumps, fans and control panels in schools, government buildings and warehouses, and set the routes and controls after reviewing the plans.
You are based in Jeddah, so how are pumps and fans supplied to Hail and installed?
We supply pumps, fans and control panels from our suppliers to your site in Hail, agree the delivery and installation dates in the quote, and are present to oversee installation and testing.
Do Hail's winds and temperature swings affect the runs and pumps?
Strong winds call for secure mounting of pumps and outdoor units, and temperature swings make pipe insulation essential, especially on exposed runs. We select equipment and fixings that withstand these conditions.
How is the installation coordinated with a school or government building's management?
We liaise with you and the site management to schedule installation at times that do not disrupt operations, and ensure the runs and pumps are installed safely and to the approved plans.


























































































