Electro-mechanical works in Tabuk, Tabuk Region

Electro-mechanical works in Tabuk include supplying and installing the electrical runs, pipework, pumps and fans that support HVAC systems in villas, commercial buildings and warehouses. These works need careful coordination with the site contractor and other trades before walls and ceilings close.

4.9 on Google
  • Power panels
  • Control automation
  • Site coordination

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When these works are needed

  1. 1

    A new central HVAC project

    In commercial, government and industrial buildings, fitting units and ducts is not enough. You need electrical runs sized for the loads, a control panel that starts and stops equipment in the right order, and pumps and pipework designed for the building.

  2. 2

    Extending an existing HVAC system

    Adding units or new control zones means extra load on the panel and new control cabling. We review the available capacity on site and define what the extension needs before any work starts.

  3. 3

    Electrical faults stopping the equipment

    A unit that will not start despite being in good order, a pump that burns out repeatedly, breakers tripping for no clear reason: these are usually a wiring or panel problem, not a fault in the equipment, and need diagnosis from a technician who understands both sides.

Who it's for

  • Building a new commercial or government project

    We review drawings with the main contractor and take on power panels, electrical runs, control automation, pumps and ventilation from start to handover.

    Ask on WhatsApp
  • Your HVAC equipment keeps breaking down

    We diagnose the electrical and mechanical side of the system and identify whether the fault is in the panel, the wiring or the control circuits before any work begins.

    Ask on WhatsApp

What the job covers

What the works cover

  • Power panels and load distribution
  • Electrical runs for HVAC
  • Automation and control circuits
  • Pumps and pipework installation
  • Ventilation and exhaust fans
Request a quote

How we work

How we work

  1. 1

    Review project drawings

    We go through the electrical and mechanical drawings with the designer or main contractor and define the power requirements and cable routes before any materials are prepared.

  2. 2

    Site coordination

    Electro-mechanical works cross paths with civil works and finishes. We follow the site programme and agree the sequence with other contractors so no trade is held up by a clash.

  3. 3

    Run cables and fit equipment

    We pull cables, mount panels, pumps and ventilation fans, then wire the control and automation circuits according to the approved site drawings.

  4. 4

    Coordinated testing and start-up

    We test each circuit individually then run the full system together with the AC equipment, checking that automation starts and stops everything in the right order before handover.

Start with step one

Why Alrabih?

Planned coordination or clashes that delay the project?

AlrabihThe usual way
Electrical panelSized for the actual loadRough sizing causes problems later
Control wiringDocumented to drawingsRun without documentation
Site coordinationFollowed with every tradeEach trade works in isolation
Start-up testFull test before handoverFaults found after handover
Change documentationRecorded at handoverVerbal changes, no record
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Electro-mechanical works in cities near Tabuk

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Tabuk

What sets this city apart

Tabuk's projects range from detached family villas and residential clusters to warehouses, government buildings and hotels. In villas the electrical runs and pipework usually go under the tiles or inside walls before plastering, so early coordination with the building trades is vital. Warehouses and government buildings may need stronger cooling pumps and longer runs, which must be planned from the start of the project.

Tabuk is a north-west city on a desert plateau ringed by mountains, with hot dry summers and cold winters.

Tabuk warehouses and government buildings commonly use high-capacity circulation pumps and long copper runs routed alongside drain pipes on roofs or in service areas.

All our services in Tabuk

The AC setup in Tabuk

  1. 1

    Runs under tiles and inside walls

    In Tabuk villas electrical runs and copper pipes go under tiles or inside walls before plastering and decoration.

  2. 2

    Pumps and runs on roofs

    Warehouses, government buildings and hotels need stronger circulation pumps and visible long runs on roofs or in service corridors.

  3. 3

    Control panels and automation

    Control panels and automation for the HVAC system usually go in a plant room or equipment room, with secure and reliable control wiring.

Before the visit

Before our visit in Tabuk

  1. 1

    Send electrical and mechanical plans

    Send the plans before the visit so we can map the electrical runs, pump locations and control panels and ensure they do not clash with other works.

  2. 2

    Confirm the plant or pump room location

    Agree the plant or pump room location with the site engineer, because it decides the length of the runs and the distances to the outdoor units.

  3. 3

    Coordinate the schedule with the main contractor

    Tell us the site schedule so we can install the runs and pumps before walls and ceilings close without delaying the other trades.

FAQ

Questions about Electro-mechanical works

Can you handle the electro-mechanical works when there is already another civil contractor on site?

Yes. We work as a specialist subcontractor alongside the main contractor, coordinating cable routes, pipework and equipment positions with the other trades on site. Before work begins, we identify where our scope crosses the civil and structural work and agree on the sequence of installation to avoid clashes.

What is the difference between the power circuit and the control circuit in an HVAC project?

The power circuit carries current from the panel to the compressor, motor or fan; cable size is set by the load. The control circuit carries low-voltage signals between sensors, thermostats and the controller; it issues run, stop and modulation commands. A fault in either circuit disables the whole system, so each is routed and terminated independently.

Does your work include connecting the automation system to a building management network?

Yes, when a building management network is already present on site. We connect the HVAC control units to the designated interface points and test signal exchange between the two sides. Protocol details and configuration are agreed with the team responsible for the building management network before installation begins.

How do you handle a clash between cable routes and ducts or pipework?

We identify clashes at the planning stage before installation starts, then consult the relevant trades to agree on an alternative route. If a site resolution is not possible, the clash is escalated to the project supervisor for a decision. Priority is always given to keeping the correct bending radius for cables and the required fall on condensate drain pipes, as compromising either affects system performance.

How do you handle a clash between cable routes and ducts or pipework?

Clashes between cable routes, ducts and pipework are common on medium and large projects. We identify them during the drawing review stage, before any trenching or pulling begins, and agree an alternative route with the trades involved. Changing a route on paper is far simpler than reworking it on site.

Do you install electrical runs and pipework in all building types in Tabuk?

Yes. We install electrical runs, pipework, pumps and fans in villas, residential buildings, warehouses and government buildings, and set the routes after reviewing the electrical and mechanical plans for the site.

You are based in Jeddah, so how are pumps and pipework supplied to Tabuk?

We supply pumps, pipework and fans from our suppliers to your site in Tabuk, and agree the delivery and installation schedule with you in the quote. We are on site for installation and testing.

Do Tabuk's hot summers and cold winters affect electrical runs and pipework?

The large temperature swings demand good insulation for pipework, especially on exposed roof runs, and secure mounting of pumps and runs so they withstand expansion and contraction. We account for this in selection and installation.

When should electro-mechanical works happen alongside building construction?

Electrical runs and pipework must go in before walls and ceilings close, and we set the timing with you and the site contractor so the work does not overlap with other trades and cause delay.

Start with a drawing review

Send us the project drawings or get in touch to set a time for a requirements review, Saturday to Thursday.

CallWhatsApp