HVAC controls and automation in Al Khobar, Eastern Province

HVAC controls and automation in Al Khobar make air conditioning in malls, residential towers and hotels work efficiently despite heat and salt air. One central controller manages all rooms and zones instead of manual operation of each unit.

4.9 on Google
  • Zone control
  • Accurate wiring
  • Automatic operation

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

Who needs these systems?

  1. 1

    Villa or office with multiple zones

    Bedrooms, reception rooms and offices have different hours of use. When each thermostat controls one zone, an empty room does not cool while an occupied one goes without; the survey decides the number of zones and what wiring the building needs.

  2. 2

    A facility too large to run by hand

    In warehouses, government buildings and commercial complexes, one operator cannot follow every unit. We connect the plant to a central point where the operator sees the status of each zone and intervenes without walking the building.

  3. 3

    A system that runs irregularly

    A unit left running after a room is vacated, or one that never stops at peak hours, is usually a controls problem rather than a fault in the unit. We inspect the control circuit and build on it a system suited to how the building is used.

Who it's for

  • Living in a villa with areas on different schedules

    We fit a thermostat for each zone and wire it to its unit so bedrooms run independently from the reception area.

    Ask on WhatsApp
  • Managing a large facility that is hard to monitor manually

    We connect units to a central control point so the operator sees every zone's status without walking the building.

    Ask on WhatsApp

What the job covers

What the work covers

  • Site survey and zoning
  • Control wiring beside ducts
  • Thermostat in each zone
  • Units linked to central point
  • Automatic operation tested per zone
Request a quote

How we work

How we work

  1. 1

    Survey the building

    We agree with you on zone boundaries, thermostat positions and the cable route before any work starts; the survey sets the real requirements based on building size and unit types.

  2. 2

    Run the control cables

    We route control cables neatly beside the ductwork and copper piping, keeping them away from power cables to avoid signal interference.

  3. 3

    Fit thermostats and connect

    We fix each thermostat in its agreed position, wire it to its unit, connect all units to the central control point and verify every circuit before testing.

  4. 4

    Start up and hand over

    We start each zone separately and check that each thermostat responds correctly, then show you how to monitor and adjust the zones from the central control point.

Start with step one

Why Alrabih?

Automatic control or manual switches?

AlrabihThe usual way
On and offAutomatic by temperatureManual switch
ZonesEach zone independentWhole building together
Operator viewCentral control pointWalk to every unit
Unit left runningStops automaticallyRuns until someone notices
Scheduled operationBy actual occupancyFixed time always
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

HVAC controls and automation in cities near Al Khobar

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Al Khobar

What sets this city apart

Al Khobar is a Gulf coast city with commercial and residential towers, hotels, malls and restaurants. Intense summer heat and salt air keep air conditioning running heavily, and automatic control distributes the load efficiently among units and stops them when not needed. In large malls and hotels, an advanced central system monitors temperatures in each zone and adjusts them by occupancy and season.

Al Khobar is a Gulf coastal city in the Eastern Province with office and residential towers, malls and hotels in a hot and humid climate.

Advanced wired central control systems connected to multiple indoor and outdoor units are standard in large Al Khobar malls and hotels.

All our services in Al Khobar

The AC setup in Al Khobar

  1. 1

    Central control room in the hotel or mall

    A room in the hotel or mall houses the main control panel and screens where staff monitor temperatures and humidity and manage all units from one point.

  2. 2

    Sensors in every commercial and residential zone

    The control system needs sensors spread through the mall floors and residential and hotel areas, each sending temperature and humidity data to the central panel.

  3. 3

    Adaptive control by occupancy and season

    The programme automatically adjusts control settings by opening hours, season and occupancy, reducing cooling during closed hours and increasing it during peak times.

Before the visit

Before our visit in Al Khobar

  1. 1

    Send the building plan and units

    Send the floor plans of different zones and the number of existing or planned units so we design the control system to fit size and layout.

  2. 2

    Designate the control room and sensor locations

    Choose a protected room away from moisture and heat for the panel, and designate thermostat and humidity sensor locations in main zones away from direct sun.

  3. 3

    Coordinate with building management and engineer

    Agree with building management and the engineer on wire routes from the control room to units and sensors, and ensure adequate power wiring in each area.

FAQ

Questions about HVAC controls and automation

Does building automation suit a residential villa?

Yes, a residential villa benefits from this system because it has several zones with different use patterns between day and night. We fit a thermostat for each zone and link the units so bedrooms run independently from the reception and the kitchen. The survey sets the number of circuits needed.

How do control cables run in a finished building?

In a finished building we run cables in trunking alongside the ductwork and copper piping. Where the duct is above a suspended ceiling the route is straightforward. The survey finds the best path for each building before any cable is pulled.

Can air dampers work with the thermostats?

Yes, a motorised damper receives a signal from the thermostat, opens when the zone needs cooling and closes when the set temperature is reached. This makes zoning more precise where one duct serves several areas, and the survey sets the correct position for each damper.

Do environmental conditions affect control wiring?

The building's conditions and its city's climate make it important to use cables with a suitable outer sheath and to seal all connections firmly against oxidation, especially where routes pass near outdoor units. We account for this in how we plan the route, fix the cables and test every circuit before handover.

Can each zone be set to start and stop at set times?

Yes, a thermostat that supports scheduling allows you to set start and stop times for each zone separately. This is particularly useful in offices and facilities with fixed working hours. The survey determines the right thermostat type for each zone based on the unit type and wiring method.

How does automatic control save power in a large Al Khobar mall?

The system monitors temperature and occupancy in each zone and automatically adjusts unit operation. In empty areas or closed hours it reduces cooling, in crowded areas it increases it. In Al Khobar's intense heat, this balance significantly cuts the bill.

You are based in Jeddah and I am in Al Khobar, how is the advanced control system delivered?

We design an advanced control system to fit your building size, number of units and zones, supply wires, thermostat, sensors and components to your Al Khobar site, and handle installation, programming and testing with duct and units.

Do salt air and extreme heat affect controls and sensors in Al Khobar?

Salt air can corrode wires and connections, and extreme heat can affect sensor accuracy. We choose salt-resistant wires and sensors, run them in sealed sun-shaded conduit, and position each sensor after the site survey to ensure reading accuracy.

What does a Al Khobar hotel or mall need before installing advanced control?

Ensure adequate power wiring on every floor, choose a protected central control room away from moisture and heat, designate sensor locations in main zones, and tell us the number of units, zones and floors.

Start with a site survey

WhatsApp us a brief description of the building and how many zones you need, or call us, and we will arrange a survey visit Saturday to Thursday.

CallWhatsApp