HVAC controls and automation in Makkah, Makkah Region
HVAC controls and automation in Makkah are essential for the large hotels and buildings that host many guests and visitors. Automated control eases the operator's workload and guest comfort, and precisely coordinates cooling across many floors and suites.
4.9 on Google- Zone control
- Accurate wiring
- Automatic operation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
Who needs these systems?
- 1
Villa or office with multiple zones
Bedrooms, reception rooms and offices have different hours of use. When each thermostat controls one zone, an empty room does not cool while an occupied one goes without; the survey decides the number of zones and what wiring the building needs.
- 2
A facility too large to run by hand
In warehouses, government buildings and commercial complexes, one operator cannot follow every unit. We connect the plant to a central point where the operator sees the status of each zone and intervenes without walking the building.
- 3
A system that runs irregularly
A unit left running after a room is vacated, or one that never stops at peak hours, is usually a controls problem rather than a fault in the unit. We inspect the control circuit and build on it a system suited to how the building is used.
Who it's for
Living in a villa with areas on different schedules
We fit a thermostat for each zone and wire it to its unit so bedrooms run independently from the reception area.
Ask on WhatsAppManaging a large facility that is hard to monitor manually
We connect units to a central control point so the operator sees every zone's status without walking the building.
Ask on WhatsApp
What the job covers
What the work covers
- Site survey and zoning
- Control wiring beside ducts
- Thermostat in each zone
- Units linked to central point
- Automatic operation tested per zone
How we work
How we work
- 1
Survey the building
We agree with you on zone boundaries, thermostat positions and the cable route before any work starts; the survey sets the real requirements based on building size and unit types.
- 2
Run the control cables
We route control cables neatly beside the ductwork and copper piping, keeping them away from power cables to avoid signal interference.
- 3
Fit thermostats and connect
We fix each thermostat in its agreed position, wire it to its unit, connect all units to the central control point and verify every circuit before testing.
- 4
Start up and hand over
We start each zone separately and check that each thermostat responds correctly, then show you how to monitor and adjust the zones from the central control point.
Why Alrabih?
Automatic control or manual switches?
| Alrabih | The usual way | |
|---|---|---|
| On and off | Automatic by temperature | Manual switch |
| Zones | Each zone independent | Whole building together |
| Operator view | Central control point | Walk to every unit |
| Unit left running | Stops automatically | Runs until someone notices |
| Scheduled operation | By actual occupancy | Fixed time always |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
HVAC controls and automation in cities near Makkah
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Makkah
What sets this city apart
Makkah holds a concentration of large hotels, residential and commercial towers that receive varying numbers of guests and staff. Automated controls in such buildings let you adjust temperatures by actual occupancy and avoid wasting cooling and power. Government and service buildings also gain from zone dividing because their needs shift with time and season.
Makkah is a holy city in a valley among rugged granite mountains in the Makkah Region, built densely with hotel and residential towers.
Large hotels in Makkah need a control system that monitors temperature and humidity across separate floors and suite zones.
The AC setup in Makkah
- 1
Central control for hotel towers
In Makkah's hotel towers a central system gathers control data from every floor and suite, with the operator managing from the engineering office.
- 2
Temperature and humidity monitoring
Large buildings in Makkah benefit from devices that monitor humidity alongside temperature, especially in storage, restaurants and kitchens.
- 3
Cooling scheduled by occupancy
Scheduling in hotels and large buildings adjusts for expected occupancy times, such as prayer hours and meal times.
Before the visit
Before our visit in Makkah
- 1
Prepare the suite and floor layout
Send a building or hotel plan showing the number of floors and suites and where the main control points will be.
- 2
Confirm where the main control panel goes
Choose an accessible, cool spot in the engineering office or plant room for the main panel.
- 3
Coordinate the routes with the contractor
Ask the contractor to mark the duct and pipe routes before the ceilings close, because the control wires follow them and run alongside.
Other services in Makkah
FAQ
Questions about HVAC controls and automation
Does building automation suit a residential villa?
Yes, a residential villa benefits from this system because it has several zones with different use patterns between day and night. We fit a thermostat for each zone and link the units so bedrooms run independently from the reception and the kitchen. The survey sets the number of circuits needed.
How do control cables run in a finished building?
In a finished building we run cables in trunking alongside the ductwork and copper piping. Where the duct is above a suspended ceiling the route is straightforward. The survey finds the best path for each building before any cable is pulled.
Can air dampers work with the thermostats?
Yes, a motorised damper receives a signal from the thermostat, opens when the zone needs cooling and closes when the set temperature is reached. This makes zoning more precise where one duct serves several areas, and the survey sets the correct position for each damper.
Do environmental conditions affect control wiring?
The building's conditions and its city's climate make it important to use cables with a suitable outer sheath and to seal all connections firmly against oxidation, especially where routes pass near outdoor units. We account for this in how we plan the route, fix the cables and test every circuit before handover.
Can each zone be set to start and stop at set times?
Yes, a thermostat that supports scheduling allows you to set start and stop times for each zone separately. This is particularly useful in offices and facilities with fixed working hours. The survey determines the right thermostat type for each zone based on the unit type and wiring method.
How does automated control help a large hotel in Makkah?
Automated control lets one operator see and set temperatures across all floors and suites from one centre. If a suite is empty or partly occupied, the system reduces cooling automatically, saving energy and costs.
Do control wires run with the copper pipes and duct in Makkah?
Yes. We plan the wire, pipe and duct routes together before installation so they run parallel without crossing or damage. We ask for your drawings and approval of the route before we start.
Does Makkah's hot, dry climate affect the control equipment?
High heat and dryness call for careful selection of wires and equipment. We choose heat-rated devices and place control panels in cool, protected spots away from the sun.
Can new control equipment be added to an old system in a Makkah hotel?
It depends on the old system's condition and whether the existing wires can carry additions. We visit the hotel, study the old design, then tell you if an upgrade is practical and at what cost.


























































































