Retail cooling without downtime
Mall & retail HVAC in Al Salmiyah Al Sharqiyah
In Al Salmiyah Al Sharqiyah, south Jeddah, modern malls and retail shops need robust, reliable HVAC to handle the heat. Alrabih designs, installs and maintains central and split systems that hold the temperature steady through foot traffic and open doors all day.
- Separate tenants
- Rooftop packaged
- Off-hours service
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When you need a retail HVAC specialist
- 1
A new mall or shopping centre
A poor design from the start means cold zones next to stifling ones and endless tenant complaints. We study the heat load of each zone separately and choose the right unit type before the ceiling is built.
- 2
An existing shop with uneven cooling
The back of the shop is cold while the front near the door stays hot at peak hours. The cause is usually the air outlet layout or the unit size; a site survey identifies which and fixes the problem without replacing the whole system.
- 3
Condensate dripping on shelves or display
A single drip on stock or a glass display front damages the product and the shop's image. The cause is usually weak insulation, a blocked condensate line or an unlevel unit, all of which can be diagnosed and fixed in one visit.
Who it's for
Opening a new shop inside a mall
We design an independent unit for your space and install ductwork and condensate lines before finishing work so your opening is not delayed.
Ask on WhatsAppManaging an existing commercial complex
We review the existing system and set a preventive and corrective maintenance contract scheduled outside trading hours so tenants are not affected.
Ask on WhatsApp
What our mall and retail work covers
- Heat load study per zone
- Rooftop packaged unit installation
- Independent units per tenant
- Ductwork from our workshop
- Maintenance contracts off peak
How we work
How we work
- 1
Site survey and loads
We visit the site and map every heat source: entrances, lighting, expected crowd density and facade orientation, then size the units correctly for each section.
- 2
Design and materials
We design the duct network in our own workshop from G90 galvanised sheet to dimensions that give even air distribution, and select units from brands we distribute such as Carrier, YORK and Gree.
- 3
Installation coordinated on site
We coordinate installation with the project programme so ductwork does not delay finishing trades, and run Mueller copper in runs of up to 30 metres without welded joints to reduce potential leak points.
- 4
Start-up and maintenance contract
We start up the system and check air distribution in every section, then set a preventive and corrective maintenance schedule timed so work never overlaps with the shop's trading hours.
Designed for the space or just fitted?
| Alrabih | The usual way | |
|---|---|---|
| Air distribution | Load study per zone | One unit for the whole space |
| Ductwork | G90 sheet, sized for the job | Off-the-shelf wrong size |
| Condensate | Dedicated line away from stock | Risk of drips on shelves |
| Maintenance | Scheduled outside shop hours | Surprise outage during trade |
| Copper purity | Mueller copper, 99% pure, no welds | Unspecified pipe source |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Most retail buildings in Al Salmiyah Al Sharqiyah are relatively modern, with open floor plans and large glazed frontages that catch the sun all day. That design means the cooling system must deliver high, steady capacity, especially during peak hours when doors stay open. Regular maintenance is vital to prevent water leaks onto stock and floors, and it must happen outside trading hours to keep customers and shop staff undisturbed.
Al Salmiyah Al Sharqiyah is in south Jeddah, home to large malls and modern retail chains with spacious car parks.
Most large malls and retail spaces here run central HVAC systems with powerful outdoor units, some rooftop-mounted and others in dedicated plant rooms.
The AC setup in Al Salmiyah Al Sharqiyah
- 1
Central system with dual air distribution
Large malls need extensive ductwork distributing cold air to different zones, with independent control over each area.
- 2
Condenser units on roofs or in dedicated plant rooms
Large condenser units sit on safe roofs or in dedicated plant rooms, away from customers and shop entrances.
- 3
Distributed temperature monitoring system
Sensors throughout the mall monitor temperature across different zones, ensuring cool air reaches every corner evenly.
Before the visit
Before our visit in Al Salmiyah Al Sharqiyah
- 1
Coordinate service timing with mall management
Notify the mall management about the service date in advance so they can brief tenants and avoid any disruption to trading hours.
- 2
Ensure the roof and plant room are safely accessible
Confirm the roof and plant rooms are safe to enter and work in, and that doors and passages are clear of obstructions.
- 3
Provide details on ductwork and drainage layout
Share a plan or outline of the existing ductwork and drainage points so we can plan maintenance efficiently.
More districts for Mall & retail HVAC
Other services in Al Salmiyah Al Sharqiyah
FAQ
Questions about Mall & retail HVAC
How do you handle doors that open onto the street all day?
An open door pushes in hot humid air and spikes the heat load suddenly. We include that load in the design and direct a supply outlet above the entrance to form an air barrier that reduces mixing. The survey confirms which arrangement suits each specific doorway.
Do you install separate units for each mall tenant?
Yes. A separate unit per tenant means each shop controls its own cooling and a fault in one unit does not affect the neighbour. It also makes consumption readings straightforward and makes maintenance responsibility clear for each party.
Why do you prefer rooftop packaged units for malls?
A rooftop packaged unit keeps the condenser and evaporator in one casing above the roof, freeing every inch of shop floor from outdoor units and shortening the duct run. Maintenance happens on the roof without entering the shop, which fits scheduling work outside trading hours.
How do you handle Jeddah's heat and its effect on rooftop units?
Rooftop units in Jeddah work in hot, salty and dusty air that strains the condenser and speeds fin corrosion. We specify units with corrosion-resistant coatings and include coil cleaning and compressor and condenser checks in the preventive schedule of every maintenance contract.
Does air distribution design differ between a small shop and a large mall?
The site survey decides. A small shop may need only a concealed unit with directional grilles, while a mall requires a duct network with dampers zoned by area. In both cases the positions of lighting, visitor traffic and entry doors are recorded before supply outlets are placed.
How do you handle peak-hour heat and crowding in a busy mall?
We install a system that balances the shifting cooling load throughout the day, so it can handle open doors and heavy foot traffic without breaking down. Regular maintenance keeps the performance steady.
Stock and floors are at risk from moisture, is the drainage truly safe?
We ensure drainage pipes are properly pitched to flow to the main sewer without pooling anywhere. Regular cleaning prevents leaks onto the shop floor.
When can you visit so the shops stay open?
We agree with the mall management on service hours beforehand, typically early morning or after closing, so trading is not affected.
Outdoor units on roofs need heavy-duty electrical runs, is that available?
We check the building's existing electrical capacity, and if it is not enough we coordinate with an electrician to upgrade it before installation.
