Mall & retail HVAC in Makkah, Makkah Region

Mall and retail HVAC in Makkah faces unique loads from year-round pilgrim and visitor flows and open doors in narrow, hot mountain valleys. Each shop needs its own unit to handle seasonal pressure and intense heat in tight streets.

4.9 on Google
  • Separate tenants
  • Rooftop packaged
  • Off-hours service

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When you need a retail HVAC specialist

  1. 1

    A new mall or shopping centre

    A poor design from the start means cold zones next to stifling ones and endless tenant complaints. We study the heat load of each zone separately and choose the right unit type before the ceiling is built.

  2. 2

    An existing shop with uneven cooling

    The back of the shop is cold while the front near the door stays hot at peak hours. The cause is usually the air outlet layout or the unit size; a site survey identifies which and fixes the problem without replacing the whole system.

  3. 3

    Condensate dripping on shelves or display

    A single drip on stock or a glass display front damages the product and the shop's image. The cause is usually weak insulation, a blocked condensate line or an unlevel unit, all of which can be diagnosed and fixed in one visit.

Who it's for

  • Opening a new shop inside a mall

    We design an independent unit for your space and install ductwork and condensate lines before finishing work so your opening is not delayed.

    Ask on WhatsApp
  • Managing an existing commercial complex

    We review the existing system and set a preventive and corrective maintenance contract scheduled outside trading hours so tenants are not affected.

    Ask on WhatsApp

What the job covers

What our mall and retail work covers

  • Heat load study per zone
  • Rooftop packaged unit installation
  • Independent units per tenant
  • Ductwork from our workshop
  • Maintenance contracts off peak
Request a quote

How we work

How we work

  1. 1

    Site survey and loads

    We visit the site and map every heat source: entrances, lighting, expected crowd density and facade orientation, then size the units correctly for each section.

  2. 2

    Design and materials

    We design the duct network in our own workshop from G90 galvanised sheet to dimensions that give even air distribution, and select units from brands we distribute such as Carrier, YORK and Gree.

  3. 3

    Installation coordinated on site

    We coordinate installation with the project programme so ductwork does not delay finishing trades, and supply copper runs of up to 30 metres without welded joints.

  4. 4

    Start-up and maintenance contract

    We start up the system and check air distribution in every section, then set a preventive and corrective maintenance schedule timed so work never overlaps with the shop's trading hours.

Start with step one

Why Alrabih?

Designed for the space or just fitted?

AlrabihThe usual way
Air distributionLoad study per zoneOne unit for the whole space
DuctworkG90 sheet, sized for the jobOff-the-shelf wrong size
CondensateDedicated line away from stockRisk of drips on shelves
MaintenanceScheduled outside shop hoursSurprise outage during trade
Copper runsUp to 30 m, weld-freeUnspecified pipe source
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Mall & retail HVAC in cities near Makkah

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Makkah

What sets this city apart

Makkah is a densely built holy city centred on the Sacred Mosque, with shops in many-storeyed towers and in narrow streets and souks. Pilgrim and visitor flows vary hugely by season, so duct and units must handle load swings unlike those in other cities. Intense heat trapped between towers that barely drops at night demands precise control.

Makkah is a holy city in a valley among rugged granite mountains, with a hot dry climate most of the year, and dense tower blocks housing hotels and services for pilgrims and visitors.

The typical setup is units on each tower or building roof with separate duct runs to shops on every floor.

All our services in Makkah

The AC setup in Makkah

  1. 1

    Units on tall tower roofs

    Tall towers in Makkah allow units on the roof, away from street noise and crowds below.

  2. 2

    Duct with branches across many floors

    Multi-storey malls need a main duct with precise branches on each floor so cooling reaches evenly.

  3. 3

    Safe drains in tight streets

    Condensate is carefully drained through pipes in tight streets where space is limited, sealed and secure.

Before the visit

Before our visit in Makkah

  1. 1

    Send tower and shop layouts

    Send plans showing shop locations and floor count, so we can determine unit and main duct routes before the visit.

  2. 2

    Identify roofs and available drains

    Tell us about roof access, available drains, and space for ventilation around the outdoor units.

  3. 3

    Coordinate with shop managers and staff

    Inform shop managers of installation and test dates so work doesn't disrupt trading or customer flow.

FAQ

Questions about Mall & retail HVAC

How do you handle doors that open onto the street all day?

An open door draws in outside air and spikes the heat load suddenly. We include that load in the design and direct a supply outlet above the entrance to form an air barrier that reduces mixing. The survey confirms which arrangement suits each specific doorway.

Do you install separate units for each mall tenant?

Yes. A separate unit per tenant means each shop controls its own cooling and a fault in one unit does not affect the neighbour. It also makes consumption readings straightforward and makes maintenance responsibility clear for each party.

Why do you prefer rooftop packaged units for malls?

A rooftop packaged unit keeps the condenser and evaporator in one casing above the roof, freeing every inch of shop floor from outdoor units and shortening the duct run. Maintenance happens on the roof without entering the shop, which fits scheduling work outside trading hours.

How do you handle the effect of local climate conditions on rooftop units?

Rooftop units operate in hot, dusty air that strains the condenser and speeds fin corrosion. We specify units with corrosion-resistant coatings, and the site survey accounts for the building's conditions and its city's climate. Coil cleaning and compressor and condenser checks are included in the preventive schedule of every maintenance contract.

Does air distribution design differ between a small shop and a large mall?

The site survey decides. A small shop may need only a concealed unit with directional grilles, while a mall requires a duct network with dampers zoned by area. In both cases the positions of lighting, visitor traffic and entry doors are recorded before supply outlets are placed.

How do you handle the huge seasonal swings in visitor numbers and cooling pressure?

We size units for peak pilgrimage season loads, with the ability to modulate in lighter seasons, and design distribution carefully so cooling reaches all shops despite the valley's uneven terrain.

Can you install units in very tall towers with shops across many floors?

Yes. We design a main duct on the roof with branches between floors, with separate units per floor if needed, and coordinate with the building engineer on duct and copper paths.

How does the intense heat trapped between towers affect the outdoor units?

Careful placement of units on the roof ensures good ventilation; we select units suitable for very high temperatures and plan for this in both design and installation.

How do you supply and install duct in Makkah's narrow, crowded souks?

We fabricate the duct in our workshop to agreed sizes, supply it to your site in Makkah, and agree delivery and installation dates around shopping periods and crowds. We confirm these in the quote.

Cooling built around your trading hours

WhatsApp your floor plan or a photo of the space, or call us, and we will arrange a site survey at a time that suits you, Saturday to Thursday.

CallWhatsApp