Mosque HVAC in Makkah, Makkah Region

Mosque and Islamic centre HVAC in Makkah serves millions of pilgrims and worshippers during peak seasons and throughout the year. Large systems must cool vast spaces fast and handle heavy loads and humidity, with quiet units honouring the sanctity of the place.

4.9 on Google
  • Even distribution
  • Quiet units
  • Scheduled servicing

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When a mosque needs a specialist approach

  1. 1

    Heat reaching the back rows

    Cold air pools near the units and never reaches the back of the hall. Worshippers in the far rows feel the heat even with the system running. That is a design problem, not a unit fault.

  2. 2

    Noise that disturbs prayer

    Unit noise in a quiet hall distracts worshippers and breaks concentration. The right unit type, its position and the air velocity setting all reduce noise to the lowest possible level, and those choices are made at the survey.

  3. 3

    A dome or high ceiling that traps heat

    Hot air rises and collects under the dome, so the breathing level stays warm even with large units running. We set diffuser angles and air paths at the survey to push that hot layer out rather than cool over the top of it.

Who it's for

  • Building a new mosque that needs AC from the start

    We join the design stage to fix duct routes and unit positions before ceilings are closed, so the installation is clean and efficient with no remedial work needed later.

    Ask on WhatsApp
  • Your existing mosque cools unevenly across the rows

    We survey the existing system, find the cause of uneven distribution and propose changes to the airflow paths or units without disrupting the mosque.

    Ask on WhatsApp

What the job covers

What the work covers

  • Hall survey and airflow mapping
  • Ductwork to SMACNA standard
  • Units fitted at surveyed positions
  • Airflow check across the rows
  • Contracts scheduled between prayers
Request a quote

How we work

How we work

  1. 1

    Mosque survey

    We visit the mosque outside prayer times to measure the hall, ceiling height and dome, and agree diffuser positions, duct routes and unit locations before any work begins.

  2. 2

    Design and fabrication

    We design the system from the survey data and fabricate the ducts in our own workshop from G90 galvanised sheet, then prepare them for installation.

  3. 3

    Installation at agreed times

    We coordinate with mosque management to work between prayers or at times that do not interrupt activities, and we leave the hall clean at the end of each working day.

  4. 4

    Testing and handover

    We run the system and measure air distribution at the front and back rows and sound levels, adjusting the balance until comfort is even across the whole hall.

Start with step one

Why Alrabih?

Designed for a mosque or units placed at random?

AlrabihThe usual way
Air distributionEven across every rowCold front, hot back
SoundAssessed at surveyNot considered
Dome and high ceilingPlanned airflow pathsHot layer left above
MaintenanceScheduled between prayersVisits that disrupt use
Startup schedulingProgrammed before each prayerManual, inconsistent start
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Mosque HVAC in cities near Makkah

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Makkah

What sets this city apart

Makkah hosts vast numbers of pilgrims and worshippers, and its mosques and Islamic centres are among the world's largest, with extremely high ceilings, vast halls and complex spaces. The mountain valley's humidity affects cooling efficiency and condensation, and the heat load is massive when spaces fill with crowds. We design very high-capacity systems with fine control, and plan insulation, ventilation and seasonal maintenance carefully.

Makkah is a holy city in a valley among the rugged Hijaz mountains, with a hot dry climate most of the year and variable humidity; the urban fabric is dense towers and hotels serving pilgrims.

Large mosque systems in Makkah use multiple outdoor units on the building roof and main duct with very large sections.

All our services in Makkah

The AC setup in Makkah

  1. 1

    Multiple outdoor units on the roof

    Multiple outdoor units are mounted on the mosque or centre roof, spreading the load and improving efficiency across vast spaces.

  2. 2

    Main duct with very large sections

    A main duct with very large sections runs beneath the soaring ceiling, with branches precisely distributed to cool the arcades, side halls and inner courtyards.

  3. 3

    Strategic return-air grilles

    Return-air grilles are placed strategically to draw warm, humid air from every part of the space efficiently.

Before the visit

Before our visit in Makkah

  1. 1

    Provide the complete mosque plan and dimensions

    Send the mosque or Islamic centre's floor plan showing the ceiling, columns, spaces, halls and courtyards, so we design the system accurately.

  2. 2

    Confirm outdoor unit installation points

    Agree the outdoor unit locations on the roof and any foundations needed with the engineer, as these determine duct and copper lengths and system balancing.

  3. 3

    Schedule delivery, installation and commissioning

    Tell us suitable times for delivery, installation and testing, preferably away from worship and peak times, so we complete work smoothly.

FAQ

Questions about Mosque HVAC

How do you make sure the far rows get enough cooling?

At the survey we set diffuser angles, air velocity and duct routing so cold air travels to the last row. After installation we measure the temperature difference between the front and back rows and adjust each diffuser's balance until that difference is as small as the space allows.

Can you work in a functioning mosque without disrupting prayers?

Yes. We agree a phased schedule with mosque management in advance and divide the work into sessions between prayers. Before each call to prayer we lift tools, cover any temporary openings and return the hall to a usable state, then resume afterwards.

What type of ductwork do you use in prayer halls?

We fabricate ducts in our own workshop from G90 galvanised sheet, round or rectangular as the design requires. We use Armaflex and Kimmco insulation and Foster sealants to limit heat gain and keep sound transmission through the ductwork as low as possible.

Can the system be set to start just before each prayer time?

Yes. The controls on Carrier, YORK, General, Midea, Gree and Smart Gold units support scheduled start and stop times. At the survey we confirm the scheduling options for the chosen units and programme the timings at handover, so the hall is already cool when worshippers arrive.

Can we cool only part of the hall when fewer people attend?

Yes, if the system is designed in zones. We divide the hall into sections, each with its own unit or closable outlets, so you run the front rows alone when few people attend and the whole hall for Friday prayer and occasions, cutting power use without affecting worshippers.

How do you cool a vast mosque with extremely high ceilings in Makkah?

We design multi-unit systems with very high capacity, and use a main duct with large sections and precisely distributed outlets to deliver cold air to every corner without pressure loss.

How does the large duct from our Jeddah workshop reach the mosque site in Makkah?

We fabricate the large duct sections to exact measurements in our workshop, supply them assembled or in pieces as the design requires, then assemble and install them on site according to the agreed schedule.

Does Makkah's mountain humidity affect mosque cooling?

Variable humidity increases the load on cooling and condensation, so we select units with precise humidity control and plan insulation and drainage carefully to prevent condensation and mould.

How do you maintain the system between busy pilgrimage seasons?

We design the system for easy maintenance between seasons, with regular checks of the duct and units and filter and outlet cleaning to ensure peak efficiency when the next season arrives.

Prepare your mosque for comfortable prayer

Send us a photo of the hall or dome on WhatsApp or call us, and we will arrange a survey at a time that suits the mosque, Saturday to Thursday.

CallWhatsApp