One contractor, whole plant
Operation & maintenance contracts in Al Furqan
In Al Furqan, a newer northern district, modern residential buildings, hotels and hospitals rely on complex central HVAC systems. Alrabih's operation and maintenance contracts keep these systems running reliably through Jeddah's long summer.
- Daily operation
- Preventive maintenance
- Documented reports
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs an operation and maintenance contract?
- 1
A facility without an in-house team
Hotels, factories and government buildings need someone daily to start chillers, watch pumps and log readings. Without a specialist team, a small fault grows before anyone notices.
- 2
A facility with repeated breakdowns
Repeated breakdowns usually point to missed preventive work: a blocked filter, a compressor running under load, a worn pulley in an AHU. A contract catches these causes before they become full failures.
- 3
A government or hotel project that requires records
Some government and hotel clients require operating logs and regular maintenance reports. We produce these on schedule and keep them available whenever you need them.
Who it's for
Managing a hotel where the HVAC plant runs all day
We handle daily operation of chillers, AHUs and pumps, and produce the reading logs and reports your hotel management requires.
Ask on WhatsAppRunning a factory where an HVAC stoppage halts production
We carry out preventive maintenance on compressors, coils and valves on schedule so your production line is not stopped in Jeddah's summer, and we repair any fault as soon as it appears.
Ask on WhatsApp
What the contract covers
- Daily chiller and pump operation
- Preventive equipment and duct maintenance
- Fault repair and parts replacement
- Performance testing and readings log
- Periodic facility management reports
How we work
How we work
- 1
Site survey and plant assessment
We visit the facility and record all HVAC equipment, assessing the condition of each unit before signing, because the scope depends on what the survey finds.
- 2
Agree scope and schedule
We set the preventive maintenance schedule with you, define the daily operating tasks and each party's responsibilities, and agree the format and frequency of reports.
- 3
Start operations and preventive work
Our team handles daily operation and carries out preventive work on schedule: cleaning coils, inspecting compressors, testing valves and manifolds, and logging readings each round.
- 4
Regular reports and ongoing follow-up
We send periodic reports covering work completed, observations and any parts replaced, so facility management stays fully informed about the plant's condition.
A full contract or repair-only calls?
| Alrabih | The usual way | |
|---|---|---|
| Accountability | One contractor follows all | No clear party |
| Fault detection | Before breakdown | After the equipment stops |
| Documentation | Regular logs and reports | No records kept |
| Major fault costs | Reduced by prevention | Arrive unplanned |
| Reading logs | Recorded every round | Left to operator if any |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Furqan's buildings are relatively new and spread across wide plots, housing large residential complexes, hotels and clinics that depend on advanced central HVAC systems with pumps and automated controls. Routine maintenance of these complex setups is essential because any one component failure affects the whole building, and in extreme heat can cause significant productivity loss or health risks. A maintenance contract secures regular inspections, fast repairs and clear records that protect your investment.
Al Furqan lies in Jeddah's north, a district of newer, spacious buildings housing advanced residential, hotel and medical facilities.
Most large facilities here depend on central chillers or air handling units with forced-air distribution through ductwork.
The AC setup in Al Furqan
- 1
Central chillers with air handling units
Large facilities in Al Furqan use central chillers to cool distribution water and air handling units that push chilled air through the ductwork.
- 2
Pump systems and automated controls
Central systems need pumps to circulate chilled water and automated controls to balance pressure and temperature across all zones.
- 3
Ductwork distributed across every floor
Modern buildings here have extensive ductwork networks running across every floor to ensure even distribution of chilled air.
Before the visit
Before our visit in Al Furqan
- 1
Locate the plant room and chillers
We need the exact location of the plant room and safe access to it, or whether we need to coordinate with your in-house maintenance team.
- 2
Provide building plans and system diagrams
Send us diagrams of the ductwork, electrical systems and pumps before finalising the contract so we understand the scope and complexity.
- 3
Agree on the preventive visit schedule
Decide with us how often routine inspections should happen each month or quarter, and what times suit your critical operations best.
More districts for Operation & maintenance contracts
Other services in Al Furqan
FAQ
Questions about Operation & maintenance contracts
Do you handle plant operation as well as maintenance?
We cover both. Our team operates the plant daily: monitoring circuit pressures, water temperatures and flow rates, logging control-panel readings, and adjusting settings to match the load. Alongside daily operation, the contract includes preventive and corrective maintenance, with regular reports submitted to facility management.
What is the difference between preventive and corrective maintenance in your contract?
Preventive maintenance means inspecting components while they are still running: cleaning AHU coils, checking pump belts and fan bearings, verifying copper-pipe connections, and testing condenser and evaporator performance. Corrective maintenance starts when an actual fault is found, such as a tripping breaker, a degraded capacitor or a circuit leak, and the goal is to restore full plant performance.
Can you work on different brands of equipment in the same facility?
Yes. Many facilities combine equipment from several manufacturers on a single network. Our team works with Carrier, YORK, General, Midea, Gree and Smart Gold equipment within one unified operating system. When a contract covers multi-brand equipment, the initial site survey sets the specific procedures for each unit.
What happens when a worn part is found during a preventive maintenance round?
The technician records the finding in the inspection log and notifies the facility supervisor immediately. The extent of the damage and its effect on the rest of the plant is assessed, then the part is replaced or repaired under corrective maintenance before the fault develops and disrupts operation. The full incident is entered in the visit report.
What happens when a worn part is found during a preventive maintenance round?
We record the finding immediately in the round log and inform facility management of the part and the cause of the wear. After approval we replace the part and record it in the maintenance report. The final decision stays with you, and identifying the right part depends on the unit specifications noted in the survey.
Do you cover hospital and hotel maintenance contracts in Al Furqan?
Yes, we cover all of Al Furqan and handle complex central HVAC systems in hospitals, hotels and large residential buildings, with specialist staff and regular clear reports.
Our systems are complex and multi-part, does maintenance cover everything?
Our contracts cover pumps, chillers, air handling units, ductwork and controls, with regular inspections and precise recording of every component.
Extreme summer heat can suddenly fail the system, how fast is your response?
The maintenance contract ensures a team is available for urgent repairs if any part fails, and all work and time is logged in reports.
Are duct cleaning and condenser cleaning part of the contract?
Yes, regular cleaning of ducts, coils and condensers is part of the scheduled maintenance, according to the terms agreed in the contract.
