Testing and commissioning in Taif, Makkah Region
Testing and commissioning systems in Taif accounts for mild summers and cool winters, and homes and hotels scattered across hillsides. We check pressure, leaks, vacuum and grounding, then start the system, measure temperature and airflow at each outlet and balance all rooms and corridors before handover.
4.9 on Google- Line test
- Air balance
- Controls set
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When commissioning becomes necessary
- 1
A new system before handover
The contractor has finished and handover is due. Before the owner signs off, you need confirmation that the line is tight, the ductwork distributes air evenly and the thermostat controls the system as designed. No earlier stage replaces this step.
- 2
A major change to an existing system
Rooms have been added, a large duct section replaced or the central unit changed. A major modification shifts the pressure and airflow balance across the whole system and calls for a full test as if it were new.
- 3
Rooms that cool unevenly
Some rooms are too cold while others barely cool, even though the system runs. The cause is usually dampers that were never balanced or air outlets sized for a different room, both of which are corrected during the balancing stage of commissioning.
Who it's for
Your new villa is ready for contractor handover
We test the refrigerant line, ductwork and every air outlet, set the dampers and check the thermostat before you accept the system from the contractor.
Ask on WhatsAppYou have added floors and modified the AC system
A major modification shifts balance across the whole system. We test pressure and airflow and reset every damper across all zones.
Ask on WhatsApp
What the job covers
What the commissioning covers
- Line pressure and vacuum test
- Electrical circuits and protection checks
- Air temperature at every outlet
- Damper adjustment for room balance
- Thermostat and control panel check
How we work
How we work
- 1
Pre-start check
Before start-up the technician checks copper joints, ductwork connections and wiring, and confirms insulation is intact and ducts are clear. A fault found before start-up is far easier to correct than one found after.
- 2
Line test
We pressurise the refrigerant line and watch the reading to confirm no leak, then vacuum the line to remove air and vapour, hold the reading steady, and only then release the refrigerant.
- 3
First start-up and airflow
We start the system and measure the air temperature at every outlet, then adjust each damper until the rooms reach the temperatures the system was designed to deliver.
- 4
Controls check and handover
We test the thermostat and any control panel, confirm the system responds to every command, then show the owner how to set the thermostat and the right setting for each room before we hand the system over.
Why Alrabih?
Planned commissioning or a quick switch-on?
| Alrabih | The usual way | |
|---|---|---|
| Leak test | Pressure and vacuum test | Start-up with no test |
| Room balance | Each damper measured and set | Uneven cooling left as is |
| Electrical check | Protections and wiring reviewed | Only visual power-on |
| Controls | Thermostat set and tested | Left on its first setting |
| Plenum box | Distribution checked from plenum | Not checked |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Testing and commissioning in cities near Taif
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Taif
What sets this city apart
Taif is a highland summer city known for rose farms, hotels and resorts, built with summer villas, apartments and hotels on hillsides. Mild summers and cool winters mean systems operate differently from very hot cities, and testing focuses on balance and comfort per space without over-cooling. Hotels and apartments need precise airflow verification between units, and cold winters require checking that external cold air does not infiltrate through openings.
Taif lies in the Makkah Region in the Sarawat mountains with mild summers and cool winters, built with summer villas, apartment buildings and hotels scattered on hillsides.
In Taif hotels and apartment buildings every unit's airflow is tested and verified free from cold external air leaking through exterior openings and joints.
The AC setup in Taif
- 1
Temperature balance across levels
In multi-level hillside villas we test temperature on each floor and adjust dampers so all levels reach target equally.
- 2
Exterior opening sealing check
Taif's cold winters require checking doors, windows and exterior openings are sealed so cold air does not seep in, affecting test readings or actual comfort.
- 3
Seasonal schedule settings
We set thermostats and schedules to handle mild summers and cool winters and provide guidance on adjusting settings as seasons change.
Before the visit
Before our visit in Taif
- 1
Send drawings and exterior opening photos
Send architectural drawings and photos of every window and exterior door so we can verify sealing and plan testing based on actual layout.
- 2
Set target temperatures for each season
Tell us your target temperatures for summer and winter and any schedules or usage patterns the settings should reflect.
- 3
Confirm access to roofs and outdoor units
Confirm we have safe access to villa or building roofs with outdoor units, especially on steep hillsides.
Other services in Taif
FAQ
Questions about Testing and commissioning
What is the difference between installation and commissioning?
Installation means fitting and connecting the parts. Commissioning comes after, to confirm that what was fitted works as designed: the line is tight, air reaches every room in the right quantity and the thermostat controls accurately. The two stages are different and neither replaces the other.
Does a small building need full commissioning?
Building size does not decide whether commissioning is needed. Even in a small flat or villa there may be a refrigerant leak or a damper that leaves one room far colder than another. The site and the system design decide the scope of testing required, and that becomes clear at the survey.
Why do you rely on a stable vacuum reading rather than a fixed time?
The amount of vapour trapped in a refrigerant line varies from one site to another depending on the building's conditions and its city's climate. Vapour left in the line gradually strains the compressor and weakens cooling. We therefore run the vacuum pump until the reading reaches a stable level, and only then open the refrigerant.
What if one room is still warmer after commissioning?
We go back to the air temperature at that room's outlets, check the damper and the flexible duct that feed it, and confirm the air outlet suits the room's size. Adjusting the damper is usually enough; if the cause lies in the system design itself, we explain the right solution before any further work.
Do flexible duct connections need checking during commissioning?
Yes. A flexible duct connecting a rigid duct run to an air outlet can crack or partly detach during installation without being obvious. That gap reduces air reaching the room and makes balancing readings unreliable. The technician therefore inspects every flexible duct connection before measuring airflow at the outlets.
Does commissioning in Taif differ from cities with a hot, dry climate?
Yes. Taif is mild in summer and cool in winter, so testing focuses on temperature balance and comfort without excess, and in winter we verify external cold air does not seep in through openings and exterior doors.
Do target temperatures change between summer and winter in Taif?
Yes, target temperatures may differ, so during testing we adjust thermostats and dampers to achieve comfort in both seasons, documenting settings and schedules in the handover record.
How do we test systems in summer villas on Taif hillsides?
In hillside villas we test systems after occupancy, verifying even distribution across rooms at different levels and that outdoor units on roofs are secured against strong mountain winds.
Does Taif's cold winter weather affect testing?
Yes, so we test during mild parts of the day when possible, verify all joints are sealed against cold air infiltration and document outdoor temperature at test time in the record.


























































































