Tower and office building HVAC in Taif, Makkah Region
HVAC for towers, hotels and residential buildings in Taif balances relatively mild seasons with sharp daily temperature swings. We are based in Jeddah and supply units, duct, copper, installation and commissioning for high-rise buildings in Taif.
4.9 on Google- Zone control
- Vertical risers
- Per-floor zoning
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When your building needs a specialist contractor
- 1
New office tower under construction
The hardest part is coordinating with the main contractor: fixing riser shafts and floor penetrations before concrete is poured, locating plant rooms on the right floors, and documenting everything before walls are closed.
- 2
Existing building needing a system upgrade
The old system no longer serves the current tenant load, energy losses are high, or some floors stay warm with no one knowing where the fault starts. A detailed survey identifies the path forward.
- 3
New tenant redesigning their floor
Moving partition walls means relocating air outlets and dampers for every new office. A zone designed carefully lets you add the tenant without upsetting the air balance across the rest of the building.
Who it's for
Your office tower is under construction now
We coordinate with the main contractor to fix riser shafts, floor penetrations and plant room positions before walls are closed and concrete is poured.
Ask on WhatsAppYou manage an occupied office building with complaints
We survey the existing network floor by floor, identify why airflow is unbalanced across zones, and carry out corrections in phases without cutting cooling to neighbouring offices.
Ask on WhatsApp
What the job covers
What our scope covers
- Duct network design
- G90 sheet to SMACNA
- Zone layout and dampers
- Flexible connections and plenums
- Commissioning and air balancing
How we work
How we work
- 1
Survey and drawing review
We visit the site and review the architectural and structural drawings, fixing riser routes, plant room positions and floor penetrations in coordination with the project team.
- 2
Design and zone layout
We design the duct network, assign zones per floor and tenant, and set duct sizes, damper positions and plenum box locations for every branch.
- 3
Duct fabrication and installation
We fabricate ducts in our workshop from G90 galvanized sheet to SMACNA standards, insulate them with glass-wool, and install floor by floor in coordination with other contractors on site.
- 4
Balancing and handover
After start-up we balance airflow across all air outlets, verify each thermostat responds correctly, and hand the as-built drawings to the building management.
Why Alrabih?
Integrated design or unplanned expansion?
| Alrabih | The usual way | |
|---|---|---|
| Zone layout | Designed per floor and tenant | Estimated without design |
| Ductwork | Fabricated to calculated sizes | Random sizes used |
| Dampers | On every branch for control | Fitted where convenient |
| As-built record | Final drawings handed over | No record after handover |
| Riser insulation | Glass-wool stops condensation | Insulation skipped |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Tower and office building HVAC in cities near Taif
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Taif
What sets this city apart
Hotel and residential towers in Taif stand at altitude in the Sarawat range, where summers are mild and winters cold. High-rise buildings hold tourist and guest rooms, apartments and shared spaces, and need balanced cooling and heating. Chillers go in plant rooms protected from wind and cold, and duct rises with strong insulation because daily temperature swings are sharp.
Taif is a highland city in the Sarawat mountains with mild summers and cold winters, hosting hotels, resorts and residential buildings at altitude.
A common setup in Taif hotels is a central chiller in a wind-protected plant room with air handling units on floors providing independent comfort and complementary heating.
The AC setup in Taif
- 1
Chiller in a sheltered plant room
A dedicated plant room sheltered from mountain winds and winter cold houses the chiller, boilers or heat pumps and controls.
- 2
Balanced cooling and heating units
Air handling units on floors capable of cooling in summer and heating in winter, with independent control for each zone.
- 3
Heavily insulated duct
Rising and distributing duct is heavily insulated to withstand sharp temperature swings and prevent heat, cold and condensation loss.
Before the visit
Before our visit in Taif
- 1
Send drawings and schedules
Send architectural drawings, floor tables, uses and expected operating seasons so we can size the chiller and heating units.
- 2
Confirm plant room and shaft positions
Agree with the engineer on plant room position sheltered from wind and positions of rising duct and pipe shafts.
- 3
Coordinate building schedule with seasonal weather
Tell us the construction schedule noting cold and hot months, so we avoid installation delays due to weather conditions.
Other services in Taif
FAQ
Questions about Tower and office building HVAC
How does each tenant control their own temperature independently?
Each floor or zone is fed from its own plenum box, a damper controls the volume of air entering, and the thermostat sets the required temperature. This layout lets each tenant adjust their space without affecting the floors above or below.
Do tenant fit-out works affect cooling on other floors?
When the system is designed with independent zones, redistributing outlets or moving dampers inside one floor stays isolated from the rest of the building. We review the revised layout and rebalance that zone before the tenant moves in.
How do a building's conditions and its city's climate affect duct design in towers?
A building's conditions and its city's climate feed directly into duct sizing and treated air volume calculations. Risers near the facade also need thorough insulation, such as Kimmco, to stop condensation forming on the duct surface inside the building.
Can you work while the building is occupied?
Yes, and that requires phasing the work floor by floor or wing by wing so cooling is never cut to neighbouring offices. We agree a programme with building management before starting and identify at the survey which sections can be isolated without disrupting daily operations.
How is cooling managed for the tower lobby and car park?
The lobby and car park have different requirements from office floors: ceiling heights differ, heat loads vary and ventilation needs change. The lobby needs diffusers suited to tall spaces, while the car park requires mechanical ventilation working alongside the cooling. The site survey determines the right design for each space.
Do Taif towers and hotels run combined cooling and heating systems?
Yes. Taif towers need cooling in summer and heating in winter, and we install a central system with a chiller and boilers or heat pumps providing year-round comfort.
How does HVAC reach Taif towers from Jeddah?
We supply all units, pipes, duct and controls, deliver them to your site in Taif, install, test and commission them on the agreed dates.
How do sharp daily temperature swings between night and day affect duct and insulation?
Sharp swings cause the duct and pipes to expand and contract, so we use flexible fittings and strong insulation to prevent loss, condensation and noise.
How is duct and unit installation coordinated with construction stages in Taif?
After the structure and electrical runs are complete, and before ceilings close. We agree the timing with the contractor to avoid weather-related delays during seasonal changes.


























































































