University HVAC in Al Khobar, Eastern Province

University HVAC in Al Khobar accounts for hot humid coastal Gulf weather and salty air. Based in Jeddah, we supply and coordinate installing central systems and duct across multiple campus buildings within the long academic break between terms.

4.9 on Google
  • Hall fresh air
  • Zone control
  • Break scheduling

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When the campus needs a specialist

  1. 1

    Halls whose loads change fast

    A lecture hall goes from empty to full in minutes and the heat load jumps suddenly. A system sized for a steady load cannot handle this swing, so the compressor labours or the air fails to reach the back rows.

  2. 2

    Many buildings and scattered systems

    A campus holds buildings with systems of different ages and types. Without coordination, energy use rises and maintenance becomes difficult. We assess what is there in the survey and propose the right solution building by building.

  3. 3

    Labs that need controlled air and pressure

    A lab needs enough fresh air to dilute fumes, and sometimes a pressure difference between it and the adjacent corridor. The right damper and a carefully designed plenum box are the basis of that control, and any error in them affects the safety of the space and the work done in it.

Who it's for

  • Building a new university block that needs HVAC design

    We design HVAC and ventilation for every hall and lab from scratch, supply ductwork and suitable equipment.

    Ask on WhatsApp
  • Existing HVAC systems failing to cool the lecture halls

    We survey each building, decide what to replace or repair, and complete all works during the term break.

    Ask on WhatsApp

What the job covers

What Alrabih's university work covers

  • Design per building
  • G90 duct to SMACNA
  • Dampers and plenum installation
  • Glass wool and Kingspan insulation
  • Thermostat setting per zone
Request a quote

How we work

How we work

  1. 1

    Campus survey

    We visit every building, note its area, existing system type, air openings and usage schedule, then set intervention priorities and timing before writing any specification.

  2. 2

    Design and specification

    We design the ductwork, dampers and plenum boxes for each building, select suitable equipment from our authorised brands, then present the plan to the university administration.

  3. 3

    Works during the break

    Major works such as replacing ductwork and fitting equipment are done in the inter-term break, scheduled with the university so each phase finishes before students return.

  4. 4

    Commissioning and handover

    We run each system, set the dampers and thermostat for every hall and lab, check that fresh air reaches the back of the halls, then hand the university's technical team the system documentation.

Start with step one

Why Alrabih?

Tailored design or one solution for all?

AlrabihThe usual way
Equipment sizingMatched to each building's loadSame size for every building
Fresh airCalculated for peak occupancyLeft to natural leakage
Hall controlThermostat per zoneOne switch for the building
Works timingScheduled in the term breakMid-term disruption
DuctworkWorkshop-fabricated to design dimensionsOff-the-shelf standard sizes
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

University HVAC in cities near Al Khobar

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Al Khobar

What sets this city apart

A university campus in Al Khobar spreads lecture halls, office towers, lab buildings and multiple libraries across the eastern coast. Salty air and year-round high humidity demand equipment with strong corrosion resistance and heavy duct insulation, and fresh air is vital in crowded study halls every teaching day. Major works run in the long break, and we coordinate timing and equipment security with you, protecting supplies from salt and moisture during delivery and installation.

Al Khobar is a coastal city in the Eastern Province on the Arabian Gulf, marked by hot humid weather and salty air most of the year.

A common campus setup in Al Khobar is multiple outdoor units on tower roofs or protected areas, with heavy-insulated duct to prevent moisture condensation.

All our services in Al Khobar

The AC setup in Al Khobar

  1. 1

    Multiple-unit outdoor systems

    Large towers and buildings may need multiple outdoor units distributed on different high roofs, to shorten duct runs and ensure good air distribution across many floors.

  2. 2

    Heavy-insulated duct with vapour barriers

    Duct is wrapped with very thick insulation and strong vapour barriers along its entire length, especially on roof routes and open areas near the Gulf.

  3. 3

    Outdoor units with protective enclosures

    Outdoor units are mounted on high roofs and enclosed with steel fencing or horizontal covers to protect metals from salt, moisture and direct sun.

Before the visit

Before our visit in Al Khobar

  1. 1

    Prepare campus and tower plans

    Send the campus master plan and architectural drawings of towers and halls with floor elevations, so we determine system count, outdoor unit locations and duct and copper lengths.

  2. 2

    Approve protected outdoor unit locations

    Agree specific outdoor unit locations with the campus engineer on high roofs or salt-protected areas, as this determines duct and copper lengths, protection standards and installation methods.

  3. 3

    Arrange protected delivery and storage

    Tell us the actual break window, where supplied equipment and duct from Jeddah can be unloaded with salt-and-moisture protection, and safe access and work points away from coastal hazards.

FAQ

Questions about University HVAC

How do you handle halls that fill and empty quickly?

We calculate the hall load at maximum occupancy and design the ductwork and plenum box to meet that peak, then fit controllable dampers so the system responds quickly to change. The right thermostat for each hall also helps hold a comfortable temperature when occupancy shifts suddenly.

How does local climate affect ventilation design?

Local climate has a direct effect on ventilation design. The fresh air entering large halls carries a latent load that varies with each city's climate. We calculate this load as part of the design based on the building's conditions and its city's climate, so the equipment performs correctly. Outdoor unit materials and coatings are selected according to what the site survey reveals.

Do you make the ductwork on site or in your workshop?

We fabricate ductwork in our own workshop from G90 galvanized sheet to the designed dimensions, and also supply flexible duct connecting the main duct to the air outlets. Workshop fabrication improves dimensional accuracy and reduces time spent on the campus site.

Do you work on existing buildings that need their HVAC updated?

Yes. Many university buildings run on ageing equipment or corroded ductwork. We start with a careful survey of each building to decide what stays and what is replaced, then plan the work by building priority and term break dates so studies are not affected. The type of replacement equipment is decided by the surveyor after the site inspection.

Does a lab need a different air system from a lecture hall?

Usually yes. A lab needs enough fresh air to dilute fumes, and may need a pressure difference between it and the corridor. We set the exact requirement at the site survey according to the lab type and use, then adjust the dampers and design the air system to hold it steadily.

How do HVAC units withstand Khobar's year-round salt and humidity?

Continuous salt and humidity accelerate metal corrosion, so we choose outdoor units, duct and joints based on site survey, apply protective coatings to exposed metals, and use thick insulation with strong vapour barriers.

How is duct transported from Jeddah workshop to multiple buildings at Khobar University?

We review each system route and protected outdoor unit placement, fabricate the duct to approved sizes in our workshop, transport it to site with protection from salt and moisture, and install and test during the agreed break.

How does Khobar's continuous humidity affect duct and copper insulation?

Year-round high humidity causes constant condensation on metals and insufficiently insulated duct, so we use very thick insulation and strong vapour barriers on all routes, especially on roofs and exposed areas.

When are major HVAC works carried out at Khobar University campus?

Large-scale works are scheduled in the long inter-term break. We need advance confirmation of actual dates and duration, and a designated storage area where supplied equipment and duct are protected from salt and moisture.

Start with a campus survey

Contact us on WhatsApp or by phone to arrange a survey of your buildings, Saturday to Thursday, 8 am to 8 pm.

CallWhatsApp