University HVAC in Dammam, Eastern Province
University HVAC in Dammam faces hot humid coastal weather and salty Gulf air. Based in Jeddah, we supply and coordinate installing central systems and duct across multiple campus buildings within the long break between academic terms.
4.9 on Google- Hall fresh air
- Zone control
- Break scheduling
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When the campus needs a specialist
- 1
Halls whose loads change fast
A lecture hall goes from empty to full in minutes and the heat load jumps suddenly. A system sized for a steady load cannot handle this swing, so the compressor labours or the air fails to reach the back rows.
- 2
Many buildings and scattered systems
A campus holds buildings with systems of different ages and types. Without coordination, energy use rises and maintenance becomes difficult. We assess what is there in the survey and propose the right solution building by building.
- 3
Labs that need controlled air and pressure
A lab needs enough fresh air to dilute fumes, and sometimes a pressure difference between it and the adjacent corridor. The right damper and a carefully designed plenum box are the basis of that control, and any error in them affects the safety of the space and the work done in it.
Who it's for
Building a new university block that needs HVAC design
We design HVAC and ventilation for every hall and lab from scratch, supply ductwork and suitable equipment.
Ask on WhatsAppExisting HVAC systems failing to cool the lecture halls
We survey each building, decide what to replace or repair, and complete all works during the term break.
Ask on WhatsApp
What the job covers
What Alrabih's university work covers
- Design per building
- G90 duct to SMACNA
- Dampers and plenum installation
- Glass wool and Kingspan insulation
- Thermostat setting per zone
How we work
How we work
- 1
Campus survey
We visit every building, note its area, existing system type, air openings and usage schedule, then set intervention priorities and timing before writing any specification.
- 2
Design and specification
We design the ductwork, dampers and plenum boxes for each building, select suitable equipment from our authorised brands, then present the plan to the university administration.
- 3
Works during the break
Major works such as replacing ductwork and fitting equipment are done in the inter-term break, scheduled with the university so each phase finishes before students return.
- 4
Commissioning and handover
We run each system, set the dampers and thermostat for every hall and lab, check that fresh air reaches the back of the halls, then hand the university's technical team the system documentation.
Why Alrabih?
Tailored design or one solution for all?
| Alrabih | The usual way | |
|---|---|---|
| Equipment sizing | Matched to each building's load | Same size for every building |
| Fresh air | Calculated for peak occupancy | Left to natural leakage |
| Hall control | Thermostat per zone | One switch for the building |
| Works timing | Scheduled in the term break | Mid-term disruption |
| Ductwork | Workshop-fabricated to design dimensions | Off-the-shelf standard sizes |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
University HVAC in cities near Dammam
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Dammam
What sets this city apart
A university campus in Dammam contains lecture halls, labs, libraries and admin offices spread across several buildings near the Gulf. Salty air and high summer humidity call for equipment and duct insulation with strict protective standards, and fresh air is vital in crowded halls during full study hours. Major works run in the long break, and we coordinate precise timing with you to secure resources, equipment and labour without academic disruption.
Dammam is the capital of the Eastern Province on the Arabian Gulf coast, marked by hot humid weather and salty sea air nearly year-round.
A common campus setup in Dammam is central indoor units in main buildings with outdoor units protected from salt and moisture on high roofs or enclosed areas.
The AC setup in Dammam
- 1
Central systems shielded from salt
Central air-handling and outdoor units are installed in buildings chosen away from direct salty Gulf air exposure, or protected with barriers and sloped covers.
- 2
Duct with double insulation against moisture
Duct is insulated with thick layers and strong vapour barriers, especially on routes across open areas or near the coast, to prevent condensation and corrosion.
- 3
Outdoor units on high enclosed roofs
Outdoor units are mounted on high roofs and enclosed with fencing or covers, to reduce exposure of their metals to direct air, salt and moisture.
Before the visit
Before our visit in Dammam
- 1
Send campus plan and distances
Send the campus master plan, distances between buildings and architectural drawings of lecture halls and labs, so we estimate system count and duct and copper quantities needed.
- 2
Specify protected outdoor unit locations
Agree with the campus engineer on outdoor unit locations on high roofs or salt-and-moisture-protected areas, as this sets duct lengths, copper runs and protection standards needed.
- 3
Arrange delivery and storage before the break
Tell us the actual long break window, where supplied equipment and duct from Jeddah can be unloaded and stored, and safe work and access points away from salt-moisture exposure to the storage area.
Other services in Dammam
FAQ
Questions about University HVAC
How do you handle halls that fill and empty quickly?
We calculate the hall load at maximum occupancy and design the ductwork and plenum box to meet that peak, then fit controllable dampers so the system responds quickly to change. The right thermostat for each hall also helps hold a comfortable temperature when occupancy shifts suddenly.
How does local climate affect ventilation design?
Local climate has a direct effect on ventilation design. The fresh air entering large halls carries a latent load that varies with each city's climate. We calculate this load as part of the design based on the building's conditions and its city's climate, so the equipment performs correctly. Outdoor unit materials and coatings are selected according to what the site survey reveals.
Do you make the ductwork on site or in your workshop?
We fabricate ductwork in our own workshop from G90 galvanized sheet to the designed dimensions, and also supply flexible duct connecting the main duct to the air outlets. Workshop fabrication improves dimensional accuracy and reduces time spent on the campus site.
Do you work on existing buildings that need their HVAC updated?
Yes. Many university buildings run on ageing equipment or corroded ductwork. We start with a careful survey of each building to decide what stays and what is replaced, then plan the work by building priority and term break dates so studies are not affected. The type of replacement equipment is decided by the surveyor after the site inspection.
Does a lab need a different air system from a lecture hall?
Usually yes. A lab needs enough fresh air to dilute fumes, and may need a pressure difference between it and the corridor. We set the exact requirement at the site survey according to the lab type and use, then adjust the dampers and design the air system to hold it steadily.
How do HVAC systems handle salty Gulf air at Dammam University?
Salty air accelerates corrosion in units, duct and joints, so we choose equipment and insulation with strict protective standards based on site survey and salt exposure level, and apply protective coatings to all exposed metals.
How is duct made in Jeddah transported to multiple buildings on Dammam University campus?
We coordinate with you on each system route and protected outdoor unit placement, fabricate the duct to approved sizes, transport it to site, and install and test within the agreed break between terms.
Does Dammam's high humidity affect duct insulation?
High summer humidity causes condensation on uninsulated duct, so we use thick insulation and strong vapour barriers, and route the duct through protected areas away from direct moisture exposure where possible.
When are major campus HVAC works carried out in Dammam?
Large-scale works are scheduled in the long inter-term break. We need advance confirmation from university administration of the actual dates and duration, and where supplied equipment and duct can be stored on site.


























































































