Warehouse Cooling
Warehouse HVAC in Al Sulaimaniyah
In Al Sulaimaniyah, central Jeddah, large and mid-sized warehouses need zoned cooling to protect stock and staff from the metal roof's heat. Alrabih's team divides the warehouse by use and selects a cooling system suited to each zone.
- Zone control
- Stock protection
- Directed ventilation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When your warehouse needs a proper HVAC system
- 1
Heat that damages stored stock
Food, pharmaceutical and electronics stock all have storage temperature limits. When a metal warehouse roof bakes under Jeddah's sun, the air inside becomes a direct threat to shelf life and product quality. The solution starts with a survey of the racking layout to find the critical zones.
- 2
Workers overheating in the picking area
Workers in the picking and loading area move constantly under a hot roof. Natural ventilation alone is not enough in summer. We choose between direct cooling and evaporative cooling based on a site survey and the indoor humidity level.
- 3
Warehouse offices that are never comfortable
Supervisor and reception offices have different needs from the large storage hall. Putting them on one system raises cost and weakens performance in both areas. We give the office zone its own system and link it to the warehouse with pressure-control points.
Who it's for
Storing heat-sensitive stock in a warehouse
We locate the critical zone in the racking layout and design an independent cooling system with its own controls, keeping that area at a safe temperature separate from the rest of the warehouse.
Ask on WhatsAppBuilding a new warehouse and need HVAC from the start
We join the project at design stage before the roof closes, mapping cooling zones, ventilation and duct routes to fit the racking plan and loading doors from the outset.
Ask on WhatsApp
What the system covers
- Racking layout and zone map
- Cooling units per zone
- Ductwork from our workshop
- Independent controls per zone
- Airflow check after start-up
How we work
How we work
- 1
Site survey
We visit the warehouse, measure the internal height, review the racking layout and the positions of loading doors and offices, then map the main thermal zones before proposing any system.
- 2
System design and zoning
We design a system for each zone: central or split units for offices and critical stock areas, and evaporative or mechanical ventilation for the picking area where indoor humidity allows it.
- 3
Duct fabrication and installation
We fabricate round and rectangular ductwork in our workshop from G90 galvanised sheet to the site dimensions, insulate with Armaflex or Kimmco materials, then mount the units, run the copper and connect the control points.
- 4
Start-up and handover
We start each zone separately, measure airflow at multiple points across the warehouse floor, and check that all drain lines are clear before handing over.
A zoned system or unplanned scattered units?
| Alrabih | The usual way | |
|---|---|---|
| Zone design | Surveyed and mapped before fitting | Units added when complaints come |
| Ductwork | Fabricated to site dimensions | Flex duct without calculation |
| Evaporative cooling | Where humidity allows it | Fitted without measuring humidity |
| Sensitive stock | Separate zone with its own control | Left in the general air |
| Copper runs | Mueller, weld-free to 30 m | Multiple welded joints |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Sulaimaniyah is a busy industrial and commercial zone packed with general-goods storage, food and equipment warehouses with metal roofs that absorb the sun's heat all day, surrounded by closely built blocks with little shade or natural airflow. Central cooling here needs careful zoning because temperatures vary between high-bay storage areas and work zones, and ducts must reach every corner without obstruction.
Al Sulaimaniyah lies in central Jeddah, a dense industrial zone of metal warehouses and workshops clustered around main roads.
Most warehouses here have high metal roofs and need high-capacity central cooling units with wide distribution ducting.
The AC setup in Al Sulaimaniyah
- 1
Central system with ducts split across zones
One powerful central cooling unit feeds separate ducts reaching storage, work and loading zones, each with its own outlets.
- 2
Outdoor units on roof or side walls
Outdoor units are usually mounted on the metal roof or safe side walls away from work and loading areas.
- 3
Extra thermal insulation where needed
Some warehouses benefit from added thermal insulation on the metal roof or sections of it to reduce the cooling system's load.
Before the visit
Before our visit in Al Sulaimaniyah
- 1
Confirm safe roof access
The metal roof may be slippery or very hot, ensure the team can reach it safely with a solid ladder or secured scaffold.
- 2
Share the warehouse zone plan and uses
Send us a sketch or description of the warehouse layout: where heavy and high storage sits, where the staff works, and where loading and unloading happen.
- 3
Plan for work stoppage during installation
Duct and unit installation can take hours, agree with the team on the best time away from peak work and loading activity.
More districts for Warehouse HVAC
Other services in Al Sulaimaniyah
FAQ
Questions about Warehouse HVAC
Is evaporative cooling right for a warehouse in Jeddah?
It depends on indoor humidity levels and the type of stock stored. In well-ventilated open areas where stock is not sensitive to a small rise in humidity, evaporative cooling can work well. The site survey gives a clear answer before any decision is made.
How do you handle the height in tall warehouse bays?
In a tall bay, cool air settles low and hot air rises, which works in your favour when diffusers are aimed correctly at the working level and the racking. We set diffuser angles and positions during design based on the racking height and the movement aisles.
Can cold storage zones link to the rest of the warehouse system?
Cold rooms and freezer rooms run on their own refrigeration systems, which we install as a separate service. What we handle here is the ambient air around those room doors, so warm warehouse air does not rush in when they open, managed by pressure zoning between the two spaces.
Do warehouse air ducts need insulation?
Yes, especially ducts that run close to the hot metal roof. Without insulation, cool air gains heat before it reaches the diffusers and loses much of its effect. We insulate with Armaflex or Kimmco materials and seal joints with Foster sealants to stop air leaks.
Does airflow distribution differ between tall racking aisles and open floor areas?
Yes. In tall racking aisles the airflow path narrows and slows, so we choose directional diffusers that push air along the aisle length rather than spreading it sideways. In open floor areas we use wider-angle diffusers. The angle and position of each diffuser are set at design stage based on the aisle width and racking height.
Can you cool a warehouse with a very high metal roof?
Yes, a high metal roof requires a higher-capacity central unit and carefully distributed ducts. We size the unit based on the warehouse's volume, height and existing insulation.
Our street is narrow and delivery trucks are always parked there, how do you bring in heavy equipment?
We coordinate entry and parking with the warehouse manager in advance and bring hand-operated lifting gear if needed to move the outdoor unit or duct sections.
The heat at the roof level is much stronger than near the floor, how do you distribute cold air?
We position upper distribution outlets to vent heat from roof level, and lower outlets at work and storage height to ensure staff comfort and stock protection.
Our warehouse has different cooling zones, do you need separate units for each?
Depending on the warehouse size, one central unit with separate ducts and registers per zone may suffice, or two units if the layout and heat load require it. We confirm this on-site.
