Apartment central AC in Riyadh, Riyadh Region

Central AC in a Riyadh apartment faces tight ceilings, limited space for the indoor unit, and restricted outdoor-unit placement options. We design the system to fit the flat's layout and building rules, and install it so noise does not carry to neighbouring flats.

4.9 on Google
  • Tight ceiling
  • Sealed drain
  • Quiet running

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When central AC makes sense in your flat

  1. 1

    New flat before finishing

    The finishing stage is the right time to install central AC. The ceiling is open and walls are ready for copper and drain routes, so there is no need later to cut plaster or damage finished surfaces.

  2. 2

    Occupied flat where splits fall short

    If splits leave hot and cold patches, or the noise bothers you at night, central AC distributes air evenly and hides the unit away from the room. A site survey decides whether your ceiling height allows it.

  3. 3

    Your unit disturbs the neighbours

    In apartments, neighbours hear unit vibration through shared ceilings and walls. We choose the indoor unit suspension point carefully and use flexible collars on the air outlets to absorb vibration before it reaches the building structure.

Who it's for

  • Living in a furnished flat and want to replace splits

    We survey your ceiling void to see whether a concealed unit fits, then run copper and drain without disturbing the existing décor.

    Ask on WhatsApp
  • Buying a flat in a building under construction

    We coordinate with the finishing stage to run copper, drain and ducts before ceilings and walls are closed, so every route stays fully concealed.

    Ask on WhatsApp

What the job covers

What the installation covers

  • Ceiling survey and unit position
  • Mueller copper fully insulated
  • Condensate drain with correct fall
  • Air ducts and distributed outlets
  • Line vacuum and start-up test
Request a quote

How we work

How we work

  1. 1

    Ceiling and route survey

    We measure the available ceiling void, decide where the indoor unit hangs, map the copper route and find where condensate drains correctly. The survey settles whether one zone or more suits the flat, taking into account the building's conditions and its city's climate.

  2. 2

    Run copper and drain

    We supply copper runs of up to 30 metres without welded joints, run it insulated in the void above the suspended ceiling, and slope the condensate line towards the building drain or an external outlet, so no standing water causes odour or damage.

  3. 3

    Fit ducts and outlets

    We mount the indoor unit on vibration-absorbing hangers, route ducts to each room and place every outlet so air spreads evenly without blowing cold air directly onto anyone.

  4. 4

    Vacuum, test and hand over

    We vacuum the copper line to remove air, check all joints, then run the unit and confirm cooling in every room before we hand over.

Start with step one

Why Alrabih?

A considered install or a hasty one?

AlrabihThe usual way
Indoor unit positionSet after measuring the voidWherever it fits
Condensate drainCalculated fall to building drainMay pool and cause damage
VibrationAbsorbing hangers, flexible collarsReaches the neighbours
Air distributionOutlets placed for even spreadCold rooms and warm rooms
Corrosion resistanceInsulated copper, tight flared jointsEarly joint corrosion
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Apartment central AC in cities near Riyadh

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Riyadh

What sets this city apart

Riyadh flats range from modern compound units to older tower blocks, both with strict installation limits. Ceilings are very low and only fit a slim indoor unit hidden in a corridor or bathroom, while the outdoor unit may go on a balcony, roof or wall depending on the building bylaws. Condensate must drain out or to the sewers without ceiling damage, and soundproofing matters because the walls are thin.

Riyadh is the Kingdom's capital on the Najd plateau, built largely of residential compounds, apartment towers and office blocks.

A common setup in Riyadh flats is a slim indoor unit in a corridor or bathroom ceiling with the outdoor unit on a balcony or roof.

All our services in Riyadh

The AC setup in Riyadh

  1. 1

    Slim unit in the corridor ceiling

    The slim indoor unit sits under the corridor ceiling where it takes no room space and stays out of sight.

  2. 2

    Condensate drain to outside

    The condensate tube typically runs behind the outer wall or to the balcony, so it avoids wetting the false ceiling and leaves no dampness in the flat.

  3. 3

    Outdoor unit on balcony or wall

    The outdoor unit mounts on a private balcony or a wall bracket on the building exterior, away from neighbouring windows where possible.

Before the visit

Before our visit in Riyadh

  1. 1

    Send the flat layout and ceiling photos

    Send the building and flat plan with photos of the false ceiling, corridor and bathroom, so we can locate the indoor unit and plan the duct route.

  2. 2

    Confirm building management rules

    Check with building management that outdoor unit placement on your balcony or wall is allowed, as some buildings have strict rules.

  3. 3

    Arrange technician access to the flat and roof

    Tell us when we can enter the flat and access the roof or your balcony, so we can survey and install without disturbing neighbours.

FAQ

Questions about Apartment central AC

Is there enough ceiling space in a flat for a central unit?

It varies between flats. Slim ceiling cassettes need less void depth than full ducted units. A site survey measures what is available and decides the right type; if the corridor ceiling is too shallow we look at a storage room or bathroom ceiling instead.

Is one unit enough for the whole flat or do I need more?

It depends on the flat's area, room layout and how much sun each side receives. Two- and three-bedroom flats can sometimes work with one unit and well-planned ducts; larger flats or those with separate zones may need two. The survey decides.

Where does the outdoor unit go when the flat has no large balcony?

Options include the shared roof if the building rules allow it, a facade bracket away from neighbours' windows, or the balcony if it can take the load. We review the building's rules before recommending any position.

Does the city's climate affect the amount of condensate and how it drains?

Yes. The amount of condensate the indoor unit produces varies with the city's climate and the building's own conditions. We make sure the drain line has enough fall, that the horizontal run before it drops is not too long, and that the outlet does not conflict with other flats' drainage in the building.

Can the flat be split into two zones with different temperatures?

It is possible using two separate indoor units or by adding variable-flow dampers on the duct runs. The right choice depends on the flat's layout and the ceiling void available in each zone. A site survey decides which approach suits your room arrangement.

Can a central AC fit in a flat with a shallow ceiling?

Yes, we use ultra-slim indoor units that hide in the corridor or bathroom ceiling at a very low depth. The unit connects to the rooms via duct inside the false ceiling.

Where does the outdoor unit go if the flat has no private roof?

It usually goes on the balcony or building exterior wall, subject to local bylaws and building management approval. We check the regulations before design and choose the spot that minimises noise and visual impact.

How does duct made in Jeddah reach a flat site in Riyadh?

We fabricate the duct to the design sizes at our Jeddah workshop, deliver it to the building, install it in the ceiling before it closes, and set the delivery and installation dates in the quote.

Will the outdoor unit noise disturb neighbouring flats?

Outdoor unit noise can affect nearby flats. We site the unit and choose the fan speed after surveying, add vibration isolation if needed, and angle the discharge to avoid reflecting sound toward neighbours.

Start with a ceiling survey

WhatsApp us photos of your flat or call us to book a survey in your district, Saturday to Thursday, eight to eight.

CallWhatsApp