Central AC installation in Riyadh, Riyadh Region
Central AC installation in Riyadh starts with a heat load calculation for your villa or building and ends with handover of the complete working system. We design it, choose the units and duct from our own workshop, supply copper, install, test and commission everything under one contract from our Jeddah base.
4.9 on Google- Design and build
- Own-workshop ducts
- Full commissioning
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
Who needs a complete central system?
- 1
A new villa before finishing
The finishing stage is the right time to run central AC ducts before the ceilings close. Delaying the decision means extra cost later or compromises in the duct route that weaken airflow in certain rooms.
- 2
A commercial or office building
A commercial building needs airflow that fits how the floors are divided and how the load varies between levels. The site survey sets unit count, duct routes and outlet positions before any decision is made.
- 3
An old system draining power
Old units, deteriorating ducts and leaking copper push the electricity bill up without cooling the space properly. Replacing the whole system starts with a fresh load calculation, not with larger units pushed into the same old ductwork.
Who it's for
Building a villa and need ducts before ceilings close
We visit during the finishing stage, design duct routes and outlet positions, fabricate the ducts in our workshop and install them before the ceilings close, so you take over a fully working villa.
Ask on WhatsAppManaging a commercial building and replacing an old system
We recalculate the loads, design airflow to match the current floor layout and replace both units and ductwork completely so the system runs reliably without repeated faults.
Ask on WhatsApp
What the job covers
What the contract covers
- Load calc and system design
- Units from authorised distributors
- Duct fabrication and fitting
- Insulated Mueller copper runs
- Full commissioning and handover
How we work
How we work
- 1
Survey and load calculation
The engineer visits, measures each zone, and calculates the thermal load per area, accounting for facade orientation, ceiling height, intended use, and the building's conditions and its city's climate.
- 2
Design and unit selection
We draw duct routes and outlet positions and select units from Carrier, YORK, General, Midea, Gree or Smart Gold, then present the design to you before any work begins.
- 3
Fabrication and installation
Round and rectangular ducts are fabricated in our workshop from G90 galvanised sheet to SMACNA standards, then installed on site alongside the copper runs, insulation and electrical connections.
- 4
Commissioning and handover
We pressure-test the copper lines, vacuum them, check air balance at every outlet and condensate drain fall, then hand the system over to you in full working order.
Why Alrabih?
One contractor or several parties?
| Alrabih | The usual way | |
|---|---|---|
| Design and build | One party accountable | Designer and installer split |
| Ducts | Our workshop, G90 standard | Unmonitored outside suppliers |
| Copper | Up to 30 m, weld-free | Unknown source, many joints |
| Commissioning | Pressure test, vacuum, air balance | Straight power-on, no testing |
| Insulation | Armaflex and Kimmco fitted | Patchy or missing |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Central AC installation in cities near Riyadh
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Riyadh
What sets this city apart
The spacious villas, compounds and office and commercial buildings in Riyadh need powerful and precise central air conditioning. In a villa we typically install a horizontal concealed unit above the false ceiling and an outdoor unit on the roof, with insulated duct in unconditioned spaces. Larger buildings need a design that splits the load across several units and balances pressure and airflow across multiple floors.
Riyadh, the Kingdom's capital on the Najd plateau, has a hot dry climate with scorching summers and is built largely of large villas and residential and office towers.
In most Riyadh villas the indoor unit needs strong insulation because the duct crosses unconditioned spaces before reaching the false ceilings.
The AC setup in Riyadh
- 1
Horizontal concealed unit with rooftop placement
In villas the indoor unit is mounted above the false ceiling and the outdoor unit sits on the roof, with insulated duct connecting through the spaces between.
- 2
Multi-unit system for large buildings
Large office and residential buildings need several indoor units distributed across floors or wings, fed by one main duct with dampers controlling the distribution.
- 3
Heavy insulation for exposed duct
Duct and copper crossing roofs and unconditioned spaces receive thick insulation to protect them from the extreme summer heat.
Before the visit
Before our visit in Riyadh
- 1
Provide architectural and site drawings
Send the foundation, floor and roof plans before the visit, so we can pinpoint unit and duct locations and calculate the heat load accurately.
- 2
Clarify which areas are and are not conditioned
Make clear which spaces you want air-conditioned and which you do not, as this affects the system and duct size.
- 3
Coordinate unit positions with the site contractor
Agree the indoor and outdoor unit locations with the site contractor before ceilings and walls start, and tell us the plan.
Other services in Riyadh
FAQ
Questions about Central AC installation
How do you decide the right unit size for my villa?
We calculate the thermal load for each zone based on its area, ceiling height, number of external openings, orientation and intended use, taking into account the building's conditions and its city's climate. We choose the unit size after this calculation, not before.
Do you make the ducts yourselves or buy them ready-made?
We fabricate round and rectangular ducts in our own workshop from G90 galvanised sheet or aluminium sheet depending on what the project needs. This lets us cut ducts to the exact site dimensions and fit them tightly, avoiding ill-fitting sections that leak air and raise electricity consumption.
What if the copper run to an outdoor unit is very long?
We supply copper runs of up to 30 metres without welded joints. If a run exceeds that, the survey determines whether the outdoor unit position needs rethinking or whether the refrigerant charge needs adjustment according to the type shown on the unit's nameplate.
Can each floor of the villa run on its own?
Yes, and it is settled at the design stage. Each floor can have its own unit, or the network can be split into zones with dampers and a thermostat in each, so you do not cool the whole upper floor while the family sits in the majlis. We recommend the right option after the load calculation.
Do the outdoor units need a special base on the roof?
Yes, and the roof surface determines what kind of base is needed. For villas we fabricate a raised steel frame that keeps the unit clear of pooled rainwater and allows airflow beneath it. The exact height and angle depend on the roof pitch and the condensate drain position, which the site survey establishes. The aim is to keep the unit level and to prevent vibration movement during operation.
What is the difference between a concealed ducted unit and a split unit in a Riyadh villa?
A concealed ducted unit distributes cold air through ducts to multiple rooms from one hidden unit above the ceiling, maintaining the look and comfort. A split unit sits on a wall and cools only one room or zone.
How does the central AC system you design and install reach my Riyadh villa from Jeddah?
We calculate the heat load and design the system to your villa's drawings, fabricate the duct in our workshop, deliver the units and materials to your Riyadh site, install everything, test it and hand over. The schedule is agreed in the quote.
Does Riyadh's extreme summer heat affect the performance of central air conditioning?
Extreme heat increases the system's load, so we choose units with sufficient capacity and insulate the duct and pipes thoroughly where they cross roofs and exposed areas, so the air arrives cold in every room.
Do I need to coordinate with the site engineer before installing central AC in a villa under construction?
Yes. The indoor and outdoor unit positions, duct route and copper runs must be set with the engineer before ceilings and walls close, otherwise changes mean opening and rebuilding.


























































































