AC duct manufacturing in Hail, Hail Region
Manufacturing duct for Hail starts with understanding the cold climate and varied facilities there. We fabricate in our workshop and supply it to your Hail site ready to install, with sealed joints and insulation against condensation and heat loss.
4.9 on Google- Sealed seams
- Full insulation
- Delivered ready
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When duct quality makes the difference
- 1
Duct losing cold air
An open seam or an unsealed joint loses cold air before it reaches the room. We close every seam with Foster sealant in the workshop before shipping, so the seal does not depend on site work alone.
- 2
Condensation wetting the ceiling
Any bare metal surface can sweat and drip onto the ceiling or damage the unit insulation, depending on the building's conditions and its city's climate. We wrap with Kimmco or Armaflex at the thickness the site calls for.
- 3
A project with many duct runs
A villa or commercial building needs main trunks, branches and plenums in several sizes. We make sections in the workshop numbered to the site plan, so the hanging crew assembles without cutting or adjusting.
Who it's for
Replacing your villa's AC and need new ductwork
We make supply and return trunks and plenums to your villa's dimensions, insulated and numbered, ready for the hanging crew without any on-site cutting.
Ask on WhatsAppRunning a commercial fit-out that needs duct runs
We take your project drawings and produce numbered sections in batches matched to your site schedule, so the hanging crew is never waiting on supply.
Ask on WhatsApp
What the job covers
What the manufacturing covers
- Supply and return trunks
- Unit plenums to opening size
- Seams sealed with Foster
- Kimmco or Armaflex outer wrap
- Numbered sections ready to hang
How we work
How we work
- 1
Send sizes or drawings
Send us the duct drawing or a list of section sizes. If sizes are not fixed yet, we agree a site survey before production starts.
- 2
Review sizes and sheet gauge
We check each section's dimensions and pick the right sheet thickness for the duct size, then confirm quantities with you before cutting begins.
- 3
Fabricate, seal and insulate
We cut and fold the G90 galvanised sheet, lock the seams with Foster sealant, and wrap each section with Kimmco or Armaflex insulation in the workshop before shipment.
- 4
Number and deliver
We mark each section with its position and dimension from the site plan, so the hanging team identifies every piece without confusion and starts work on arrival.
Why Alrabih?
Workshop-made or site-cut duct?
| Alrabih | The usual way | |
|---|---|---|
| Sealing | Foster on every seam in workshop | Uneven site sealing |
| Insulation | Kimmco or Armaflex fully wrapped | Partial or delayed wrap |
| Sheet gauge | Chosen for each duct size | One gauge for everything |
| Assembly time | Numbered, assembled straight away | Cut and adjust on site |
| Joint fit | Workshop dimensions close every joint | Hand trimming breaks the seal |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
AC duct manufacturing in cities near Hail
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Hail
What sets this city apart
Hail is a northern city mixing villas, farms, warehouses, schools and government buildings, each needing duct made to its size and use. Villas and apartment buildings need medium-sized duct, while large farms and warehouses need larger sections to distribute air across wide spaces. Hail's cold winters mean heat loss from uninsulated duct is a real cost, so strong insulation is always essential.
Hail is a northern city between the Aja and Salma mountains, with hot dry summers and cold winters that demand careful attention to heating and cooling efficiency.
Duct manufactured for Hail farms and warehouses needs thick insulation and sealed joints to minimise heat loss during winter.
The AC setup in Hail
- 1
Main duct for large Hail farms
Large farms and agricultural facilities in Hail need main duct with wide sections and strong insulation to distribute air efficiently and reduce heat loss.
- 2
Medium duct for apartment buildings and villas
Villas and apartment buildings in Hail need medium-sized duct with strong insulation to minimise heat loss during the cold winter.
- 3
Sealed joints against air loss
All duct sections in Hail are sealed with Foster sealant and wrapped with thick insulation to prevent air leaks and heat loss in the cold dry climate.
Before the visit
Before our visit in Hail
- 1
Send approved drawings and duct sizes
Before manufacturing starts, send the engineering and design drawings with the approved duct sizes, so we fabricate duct that fits your Hail project precisely.
- 2
Confirm unit positions and connections
Agree with the site engineer on the indoor and outdoor unit locations and duct connection points, as these determine the duct sizes and total length needed.
- 3
Arrange safe receiving and storage area
Tell us where the delivered duct can be unloaded and where to store it safely on site, so it is protected from the cold weather before installation.
Other services in Hail
FAQ
Questions about AC duct manufacturing
How do you make sure the duct does not leak air at the seams?
We close the long seams with a tight mechanical lock as the sheet is formed, then seal every seam and every joint between sections with Foster sealant before insulating. Sections leave the workshop with matching flanges that tighten evenly when hung, because any small gap in cold duct means lost air and a point where condensation forms.
Does the duct arrive ready to hang, or is it assembled on site?
Sections arrive fabricated, insulated, sealed and numbered to the route drawing, so the fitters know where each piece goes without cutting or altering on site. What is left on site is joining the sections, fixing them to the hangers and connecting the unit and outlets, which shortens the work above the ceiling.
Do you make plenums for cassette and cabinet units?
Yes, we fabricate plenums for both types. A cassette unit plenum is measured to match the unit's outlet frame exactly so air reaches the branch runs without leaking at the connection. A cabinet unit plenum is made to carry both the supply and return paths if the design calls for it. Both types are insulated with Kimmco or Armaflex and sealed with Foster sealant before they leave the workshop.
Can you manufacture duct for a large commercial project?
Yes. The workshop is equipped to fabricate large supply and return trunk runs suited to commercial, government and industrial buildings. Each section is made to the project drawings, numbered and delivered ready to hang after insulation and sealing. When engineering drawings are available, the technical team reviews them before fabrication starts to confirm that the duct dimensions fit the ceiling voids on site.
Why are the duct sections insulated in the workshop before delivery?
The duct carries cold air through a ceiling void that may be hot. Without external insulation, water vapour condenses on the cold sheet and drips onto the false ceiling or the goods below, according to the building's conditions and its city's climate. So each section is wrapped in Kimmco or Armaflex in our workshop and every edge and joint is sealed with Foster sealant before delivery.
Does duct manufactured for Hail farms differ from villa duct?
Yes. Duct for Hail's large farms and warehouses is made with larger sections and very thick insulation, while villa duct is smaller. Both are sealed to minimise air loss and maintain system efficiency in Hail's cold climate.
How does manufactured duct from Jeddah reach Hail?
We fabricate duct in our Jeddah workshop to the approved sizes, deliver it to your Hail site ready for installation and testing, and agree the delivery and installation dates with you in the quote.
Why is thick duct insulation necessary in Hail?
Hail's winters are cold, and uninsulated duct loses significant heat from warm air passing through it. We use Kimmco or Armaflex insulation at the thickness needed to minimise heat loss and keep the air warm from the unit to the outlets.
When does workshop manufacturing start for a construction project in Hail?
After the drawings and final design are approved and duct sizes are confirmed, we start fabrication in the workshop and deliver the duct to site before the ceilings and walls close, per the agreed schedule.


























































































