AC duct manufacturing in Tabuk, Tabuk Region

Manufacturing duct for Tabuk requires careful assessment of the climate and building before cutting metal and assembling pipes. We fabricate the duct in our workshop and supply it to your site in Tabuk ready to hang, with sealed seams and condensation insulation.

4.9 on Google
  • Sealed seams
  • Full insulation
  • Delivered ready

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When duct quality makes the difference

  1. 1

    Duct losing cold air

    An open seam or an unsealed joint loses cold air before it reaches the room. We close every seam with Foster sealant in the workshop before shipping, so the seal does not depend on site work alone.

  2. 2

    Condensation wetting the ceiling

    Any bare metal surface can sweat and drip onto the ceiling or damage the unit insulation, depending on the building's conditions and its city's climate. We wrap with Kimmco or Armaflex at the thickness the site calls for.

  3. 3

    A project with many duct runs

    A villa or commercial building needs main trunks, branches and plenums in several sizes. We make sections in the workshop numbered to the site plan, so the hanging crew assembles without cutting or adjusting.

Who it's for

  • Replacing your villa's AC and need new ductwork

    We make supply and return trunks and plenums to your villa's dimensions, insulated and numbered, ready for the hanging crew without any on-site cutting.

    Ask on WhatsApp
  • Running a commercial fit-out that needs duct runs

    We take your project drawings and produce numbered sections in batches matched to your site schedule, so the hanging crew is never waiting on supply.

    Ask on WhatsApp

What the job covers

What the manufacturing covers

  • Supply and return trunks
  • Unit plenums to opening size
  • Seams sealed with Foster
  • Kimmco or Armaflex outer wrap
  • Numbered sections ready to hang
Request a quote

How we work

How we work

  1. 1

    Send sizes or drawings

    Send us the duct drawing or a list of section sizes. If sizes are not fixed yet, we agree a site survey before production starts.

  2. 2

    Review sizes and sheet gauge

    We check each section's dimensions and pick the right sheet thickness for the duct size, then confirm quantities with you before cutting begins.

  3. 3

    Fabricate, seal and insulate

    We cut and fold the G90 galvanised sheet, lock the seams with Foster sealant, and wrap each section with Kimmco or Armaflex insulation in the workshop before shipment.

  4. 4

    Number and deliver

    We mark each section with its position and dimension from the site plan, so the hanging team identifies every piece without confusion and starts work on arrival.

Start with step one

Why Alrabih?

Workshop-made or site-cut duct?

AlrabihThe usual way
SealingFoster on every seam in workshopUneven site sealing
InsulationKimmco or Armaflex fully wrappedPartial or delayed wrap
Sheet gaugeChosen for each duct sizeOne gauge for everything
Assembly timeNumbered, assembled straight awayCut and adjust on site
Joint fitWorkshop dimensions close every jointHand trimming breaks the seal
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

AC duct manufacturing in cities near Tabuk

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Tabuk

What sets this city apart

Tabuk mixes residential villas, commercial and government facilities and large farms, each needing duct manufactured to suit its size and use. Villas and apartment buildings usually need medium-sized duct, while warehouses and government buildings need main duct with larger sections. Strong insulation is essential everywhere, because the temperature difference between cold indoor air in summer and cold winter air outside causes condensation on uninsulated duct.

Tabuk is a north-west city on a desert plateau ringed by mountains, with hot dry summers and cold winters.

Duct manufactured for Tabuk warehouses and government buildings needs thick insulation and sealed joints to prevent air leaks and condensation.

All our services in Tabuk

The AC setup in Tabuk

  1. 1

    Main duct for Tabuk warehouses

    Warehouses and large facilities in Tabuk need main duct with wide sections and thick insulation to cover large areas efficiently.

  2. 2

    Medium duct for villas and apartment buildings

    Villas and apartment buildings in Tabuk need medium-sized duct insulated against the condensation from extreme summer heat and winter cold.

  3. 3

    Sealed joints with moisture barrier

    All duct sections in Tabuk are sealed with Foster sealant and wrapped with moisture-barrier insulation to prevent condensation and leaks in the cold dry climate.

Before the visit

Before our visit in Tabuk

  1. 1

    Send approved drawings and sizes

    Before we start fabrication, send the architectural and design drawings with the approved duct sizes, so we manufacture exactly what fits your site.

  2. 2

    Confirm connection points and outlets

    Agree with the site engineer on the indoor and outdoor unit locations and the duct connection and outlet positions, as they determine the sizes and total length.

  3. 3

    Arrange unloading and temporary storage space

    Tell us where to unload the supplied duct and where to store it safely on site, so it is protected from Tabuk's harsh weather before installation.

FAQ

Questions about AC duct manufacturing

How do you make sure the duct does not leak air at the seams?

We close the long seams with a tight mechanical lock as the sheet is formed, then seal every seam and every joint between sections with Foster sealant before insulating. Sections leave the workshop with matching flanges that tighten evenly when hung, because any small gap in cold duct means lost air and a point where condensation forms.

Does the duct arrive ready to hang, or is it assembled on site?

Sections arrive fabricated, insulated, sealed and numbered to the route drawing, so the fitters know where each piece goes without cutting or altering on site. What is left on site is joining the sections, fixing them to the hangers and connecting the unit and outlets, which shortens the work above the ceiling.

Do you make plenums for cassette and cabinet units?

Yes, we fabricate plenums for both types. A cassette unit plenum is measured to match the unit's outlet frame exactly so air reaches the branch runs without leaking at the connection. A cabinet unit plenum is made to carry both the supply and return paths if the design calls for it. Both types are insulated with Kimmco or Armaflex and sealed with Foster sealant before they leave the workshop.

Can you manufacture duct for a large commercial project?

Yes. The workshop is equipped to fabricate large supply and return trunk runs suited to commercial, government and industrial buildings. Each section is made to the project drawings, numbered and delivered ready to hang after insulation and sealing. When engineering drawings are available, the technical team reviews them before fabrication starts to confirm that the duct dimensions fit the ceiling voids on site.

Why are the duct sections insulated in the workshop before delivery?

The duct carries cold air through a ceiling void that may be hot. Without external insulation, water vapour condenses on the cold sheet and drips onto the false ceiling or the goods below, according to the building's conditions and its city's climate. So each section is wrapped in Kimmco or Armaflex in our workshop and every edge and joint is sealed with Foster sealant before delivery.

How does duct manufactured for warehouses differ from duct for villas in Tabuk?

Duct for warehouses and large facilities is made with larger sections and thicker metal, while villas and apartment buildings need smaller sizes. Both are heavily insulated and sealed against the condensation caused by Tabuk's extreme temperature swings.

How does manufactured duct from Jeddah reach my site in Tabuk?

We fabricate the duct in our Jeddah workshop to the agreed sizes and design, supply it to your Tabuk site ready for immediate installation, and agree the delivery date with you in the quote.

Is heavy duct insulation necessary in Tabuk?

Yes. Tabuk's temperature swings between summer and winter mean cold air in the duct will condense on uninsulated surfaces. We use Kimmco or Armaflex insulation at the thickness needed to prevent condensation and keep the system efficient.

When is duct manufactured and delivered during a construction project in Tabuk?

After the design is approved and final drawings are ready, we start fabrication in the workshop and deliver the duct before the ceilings close, ready for installation on the agreed date.

Order your duct ready to hang

WhatsApp your drawings or size list, or call us, and we will arrange manufacturing and delivery details with you, Saturday to Thursday.

CallWhatsApp