Duct fabrication in Tabuk, Tabuk Region
Duct fabrication in Tabuk begins with precise site or drawing measurements, not guesswork or on-site cutting. We fabricate the duct in our Jeddah workshop from G90 galvanized or aluminium sheet in round and rectangular sections, and supply it to your Tabuk site ready for installation.
4.9 on Google- G90 sheet
- Site dimensions
- Complex fittings
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
Who needs workshop-fabricated duct?
- 1
A contractor with project-specific sizes
Your project has non-standard sizes or volumes too large for site cutting. We fabricate rectangular and round sections from your drawings at exact dimensions, labelled and ready to hang when they reach the site.
- 2
Fittings too awkward to cut on site
Elbows, transitions, offsets and takeoffs come out distorted when cut by hand on site, leaking air and creating noise in the line. We make them in the workshop at the right dimensions with tight seams.
- 3
Extending or renovating an existing duct network
You need new branches, a damaged section replaced or a fitting that matches an old duct size. We measure the existing network on site and fabricate the pieces to match what is already there.
Who it's for
Building a facility that needs non-standard duct sizes
We read your project drawings and fabricate all sections and fittings at exact dimensions from G90 or aluminium sheet, labelled and ready to hang the moment they reach your site.
Ask on WhatsAppRenovating home AC and need fittings to match old duct
We measure the existing ductwork in your home and fabricate the branches, transitions and elbows needed to match the original duct without replacing the whole network.
Ask on WhatsApp
What the job covers
What the fabrication covers
- Site measure or drawings
- G90 or aluminium duct
- Elbows transitions and takeoffs
- Tight seams to SMACNA
- Labelled sections ready to hang
How we work
How we work
- 1
Take measurements
A technician visits the site or you send us the drawings; we list every duct section needed, its size and the correct sheet thickness for that section.
- 2
Fabricate sections and fittings
We cut, form and lock the sheet in the workshop, including all elbows, transitions, offsets and takeoffs, and each section comes out at its exact dimension.
- 3
Label and prepare for delivery
We number every section and fitting against the assembly plan so the installation crew knows exactly where each piece goes, with no guessing on site.
- 4
Deliver to site
We deliver the duct to your site protected and ready to hang. If you need an installation crew, we can arrange that as a separate step.
Why Alrabih?
Workshop fabrication or site cutting?
| Alrabih | The usual way | |
|---|---|---|
| Dimensional accuracy | Workshop machines, tight dims | Hand variation on site |
| Complex fittings | Correct elbows and transitions | Distorted, leaking air |
| Seam quality | Tight lock, low leakage | Gaps weaken pressure |
| Site schedule | Arrives ready to hang | Extra time and site noise |
| Site and climate conditions | Aluminium where site demands | One sheet regardless |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Duct fabrication in cities near Tabuk
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Tabuk
What sets this city apart
Tabuk projects span villas, apartment buildings, government facilities, warehouses and farms, each with different duct sizes. Villas and flats need precise duct with careful joints and bends, while warehouses and government buildings need sturdy duct spanning long runs without mid-supports. We fabricate every piece to exact size, including difficult fittings, bends and transitions that are hard to cut on site.
Tabuk is a city in the north-west on a desert plateau ringed by mountains, with hot dry summers and cold winters, its buildings a mix of villas, apartment blocks, government facilities and warehouses.
Factory-fabricated duct to specified sizes avoids site cutting and fitting, speeding installation and keeping airflow even in every building.
The AC setup in Tabuk
- 1
Round duct for villas
Villas in Tabuk usually need round duct, made in the workshop to give a smooth and quiet airflow path.
- 2
Rectangular duct for large facilities
Warehouses and government buildings in Tabuk need large rectangular duct, precisely fabricated in the workshop and ready to install on arrival.
- 3
Complex fittings and bends
Tabuk projects often need complex bends and transitions, which we fabricate precisely in the workshop rather than attempting on site.
Before the visit
Before our visit in Tabuk
- 1
Send drawings or measurements
Send engineering drawings or site photos with measurements so we can calculate duct sizes and materials before fabrication.
- 2
Mark entry and exit points
Mark on the plan or site where the duct enters and exits, or locate the indoor and outdoor units, so we can determine duct length and joint counts.
- 3
Arrange duct delivery and unloading
Tell us the site access and a safe place to unload the duct from our workshop, so it arrives without delay or damage.
Other services in Tabuk
FAQ
Questions about Duct fabrication
Can you fabricate from drawings without visiting the site?
Yes, when the drawings are clear and carry the actual as-built dimensions. If a dimension is uncertain or a field change has been made, we prefer a site visit to avoid a fabricated piece that does not fit. We discuss the better approach with you before starting work.
What is the difference between galvanized and aluminium sheet for duct?
G90 galvanized sheet is the standard choice for interior duct: strong and suited to a range of pressures. Aluminium is lighter and handles exposed conditions better, making it right for some outdoor applications or where structural load is a limiting factor. The building's conditions and its city's climate determine the correct choice.
Can you make elbows and transitions to match an existing duct network?
Yes. We measure the existing network on site to match sizes precisely, whether you need a new branch added, a damaged fitting replaced or an extension tied into the original ductwork. The right approach is confirmed after the site visit.
How do you choose sheet thickness for each section?
Thickness follows section size: a large duct needs heavier sheet to hold its shape under pressure, a small one can use lighter material. We apply the SMACNA requirements to each section in the project individually, not a single thickness across the whole job.
Does climate affect which sheet material to use?
Yes, particularly for sections exposed to outdoor air or installed near fresh-air intakes. G90 galvanized sheet performs well inside the building, but aluminium is the better choice where duct faces continuously harsh air conditions. The site survey accounts for the building's conditions and its city's climate to determine the right material for each section.
How does the fabricated duct reach my site in Tabuk?
We measure the duct from your drawings or site, fabricate it in our workshop to exact sizes, supply it to your Tabuk location, and agree delivery and installation dates in the quote.
Do you fabricate duct for large warehouses and government facilities in Tabuk?
Yes. We fabricate sturdy duct with large sections for warehouses, government buildings and apartment blocks, supplying precision-made joints, bends and transitions that need no site cutting or modification.
How does Tabuk's cold winter affect the fabricated duct?
Winter cold can cause condensation on duct in unconditioned spaces, so we use aluminium sheet if needed and recommend insulation in cold zones. We choose the right material based on duct location and design.
Is factory-fabricated duct faster to install than cutting on site?
Yes. Factory-fabricated duct arrives ready to install, speeding work and cutting errors and waste, unlike site cutting which takes longer and demands high precision.


























































































