Duct insulation in Tabuk, Tabuk Region
Duct insulation in Tabuk protects metal runs from condensation in villas and commercial buildings where the duct passes through false ceilings or unconditioned spaces. We fabricate the duct in our Jeddah workshop, install it with insulation at your Tabuk site, and prevent water droplets from penetrating the ceiling or damaging walls.
4.9 on Google- Glass-wool wrap
- Vapour seal
- No condensation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When duct insulation becomes urgent
- 1
Condensation patches on the false ceiling
Patches of condensation or drips under the false ceiling usually mean cold duct with no proper insulation. Water vapour in the air touches the cold metal, condenses, falls onto the ceiling boards and ruins the plaster and paint.
- 2
Old, cracked or loose insulation
Insulation that has cracked, pulled away from the metal or been soaked by a past leak no longer stops water vapour. Even a small gap between two sections is enough for vapour to condense on the metal and restart the dripping problem.
- 3
New duct you want fully insulated
When new air ducts are installed in a home or commercial building, insulation is part of the work, not an afterthought. We wrap the duct and seal the joints before the ceiling is closed so it never needs to be opened again for this reason.
Who it's for
Noticing condensation patches on your room ceiling
We survey the duct, wrap it in glass-wool and seal every joint so condensation stops completely.
Ask on WhatsAppInstalling new duct in a commercial building
We wrap the duct in glass-wool and seal all joints before the ceiling closes, with a one-year warranty.
Ask on WhatsApp
What the job covers
What the insulation work covers
- Duct route and insulation survey
- Glass-wool wrap over duct
- Vapour-sealed joints and corners
- Plenum box and connections insulated
- Fixed with correct fasteners
How we work
How we work
- 1
Ceiling and duct survey
The technician inspects the duct route and any existing insulation, then marks the sections that need new wrapping or re-insulation before work begins.
- 2
Surface prep and strip-out
Damaged or wet insulation is stripped off and the metal surface cleaned so the new material bonds properly with no air pockets trapped beneath.
- 3
Wrap and seal
We wrap the duct in glass-wool and cover every joint, corner and connection with the correct vapour barrier, using Foster, Armaflex or Kimmco sealing materials as the site requires.
- 4
Check and handover
The technician checks the insulation along the full route, confirms the wrap is secure and joints are gap-free, then hands over the completed work with a one-year warranty and competitive prices.
Why Alrabih?
Sealed insulation or a surface cover?
| Alrabih | The usual way | |
|---|---|---|
| Vapour barrier | Sealed at every joint and corner | Left open or incomplete |
| Joins between sections | Closed with correct sealant | Tape that peels off |
| Plenum box and connections | Insulated with the rest | Sometimes left bare |
| Drips after fitting | Stops when sealing is correct | Returns within weeks |
| Sheet material | G90 galvanized sheet from SABIC | Sheet of unspecified grade |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Duct insulation in cities near Tabuk
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Tabuk
What sets this city apart
Tabuk sits on a high desert plateau where the swing between day and night temperatures increases the risk of condensation on bare cold duct. Villas, residential and commercial buildings in Tabuk need tight insulation to keep humid air from reaching the cold metal surface, because any gap in the wrap or joints lets moisture in and water droplets form and drip through the false ceilings.
Tabuk is a north-west city on a desert plateau ringed by mountains, with hot dry summers and cold winters.
In Tabuk villas and commercial buildings, insulated duct typically runs above false ceilings in unconditioned or hot spaces.
The AC setup in Tabuk
- 1
Insulated duct above false ceilings
In Tabuk villas and residential buildings, insulated duct runs above the false ceiling, shielded from warm unconditioned air.
- 2
Tight insulation at joints and corners
We fit insulation with a tight vapour seal at every joint and corner, so humid air cannot reach the cold metal.
- 3
Refurbishing old uninsulated duct
If the duct is old and bare or the insulation is damaged we fit new insulation to stop condensation and leakage.
Before the visit
Before our visit in Tabuk
- 1
Send a clear duct route diagram
Send a map of the duct route showing the false ceilings and unconditioned spaces, so we identify where extra insulation and sealing is needed.
- 2
Clarify moisture sources and ventilation
Tell us about moisture sources like kitchens, bathrooms and natural ventilation so we choose the right insulation thickness.
- 3
Ensure space for the insulation
Check that the false ceilings and space around the duct allow room for insulation without crushing or interfering with other runs.
Other services in Tabuk
FAQ
Questions about Duct insulation
Why does water vapour condense on duct?
When cold air runs through the duct it chills the metal, and water vapour in the surrounding air condenses on it immediately if no insulation keeps vapour away from the metal surface. The effect varies between buildings, and a site survey assesses the building's conditions and its city's climate to determine the right insulation.
Can duct be insulated after the false ceiling is closed?
It depends on the size of existing access hatches and the duct route. In some areas the work can be done through the hatches already there; in others a section of ceiling needs to be opened. The survey decides the right approach before any work starts.
What is the difference between Armaflex, Kimmco and Foster for duct insulation?
Armaflex and Kimmco are flexible insulation materials used for wrapping duct and reducing condensation. Foster is a sealant applied to joints and connections to block vapour from passing through. We choose the right material for each part of the duct after the site survey, and may use more than one on a single project.
Do you insulate duct in commercial and industrial projects too?
Yes, we work in residential, commercial, industrial and government buildings. Project size affects quantities and coordination with other trades, which the survey maps out.
Does the plenum box need different insulation from the rest of the duct?
The plenum box has a larger surface area and cools quickly, making it especially prone to condensation. The technician wraps it in glass-wool and seals its corners and openings with the correct vapour barrier. The sealant chosen may differ from the one used on the rest of the duct route, depending on what the survey finds.
Why does water condense on uninsulated cold duct in Tabuk?
Warm humid air surrounding cold duct condenses on it as the metal cools, forming water droplets that fall into ceilings and walls. Insulation separates the duct from the humid air and stops this condensation.
How does insulated duct from our Jeddah workshop reach your site in Tabuk?
We fabricate the duct to the approved sizes, fit the insulation and vapour seal in the workshop, supply it to your Tabuk site, install it and check the airflow, with delivery and installation dates set in the quote.
Does duct insulation need to change with the seasons in Tabuk?
Yes. The swings between hot summer and cold winter increase condensation risk, but thick glass-wool insulation and well-sealed joints protect the duct year-round.
Do we need a drain for insulated duct in commercial buildings in Tabuk?
Properly insulated duct does not condense, but if indoor units collect water from humid air they need a drain, which we determine during the site survey.


























































































