AC duct installation in Tabuk, Tabuk Region
AC duct installation in Tabuk starts with balanced branches that deliver cold air to every room evenly, then runs the duct from the concealed unit through false ceilings or walls. We are based in Jeddah: we fabricate the duct, supply it to your site in Tabuk, install it and verify the airflow balance at each diffuser before handover.
4.9 on Google- Sized branches
- Sealed insulation
- Clean return path
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When you need a properly designed duct fit
- 1
One room cold, another warm
The unit runs but one room is too warm while the next is too cold. The cause is usually unbalanced branches or a diffuser that was never adjusted, not a fault in the unit itself.
- 2
Duct sweating and water on the ceiling
Uninsulated cold duct sweats on the outside and water collects on the plasterwork above. Proper insulation with Armaflex or Kimmco stops the problem before it damages the ceiling finish.
- 3
Installing a concealed unit in a new build
The right time to fit duct properly is during the fit-out, before the false ceiling closes. We agree plenum dimensions, branch sizes and the return-air route at the survey before any work starts.
Who it's for
Fitting a concealed unit in your new villa
Before the false ceilings close, we design the plenums, branches and return-air route to suit the unit and each room in the villa.
Ask on WhatsAppSweating ceiling and uneven airflow in your building
We inspect the existing branches and return-air path, re-insulate the cold duct, and set the dampers so temperature evens out across every section of the building.
Ask on WhatsApp
What the job covers
What the duct installation covers
- Supply and return plenums
- Sized branch to each room
- Armaflex or Kimmco insulation
- Diffuser balancing with dampers
- Airflow check before ceiling closes
How we work
How we work
- 1
Site and unit survey
We measure the rooms and study the unit's data and plenum spec, and we settle the return-air route before deciding on branch sizes.
- 2
Design branches and plenum
We size each branch so it takes the right share of air without starving rooms farther from the unit, and we plan a return path with a correctly sized intake opening.
- 3
Fit and insulate
We fix the plenums and branches using SMACNA-standard duct, then insulate every cold surface with a sealed layer suited to the building's conditions and its city's climate.
- 4
Balance and hand over
We set each diffuser damper and check airflow in every room with you before the false ceiling is closed, then leave the site clean.
Why Alrabih?
Designed duct or just connected duct?
| Alrabih | The usual way | |
|---|---|---|
| Branch sizing | Calculated per room | Connected without sizing |
| Return air | Routed with a sized intake | Left to chance |
| Duct insulation | Sealed against sweating | Thin or absent |
| Diffuser balance | Damper set per room | All diffusers fully open |
| Pre-closure airflow check | Done with you before closing | Faults found after ceiling closes |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
AC duct installation in cities near Tabuk
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Tabuk
What sets this city apart
Tabuk has villas, apartment buildings, warehouses, hotels and government buildings. In homes the duct runs above false ceilings between rooms, and often needs strong insulation to stop humidity condensing on the cold surface, especially where air moves from a cooled room into a warmer corridor or store. Commercial and government buildings need larger duct sections and even distribution across different floors.
Tabuk is a city in the north-west on a desert plateau ringed by mountains, with hot dry summers and cold winters.
Duct in most Tabuk villas and flats runs above the false ceiling with extra insulation to combat humidity where air moves between zones.
The AC setup in Tabuk
- 1
Insulated duct above false ceilings
In Tabuk homes the duct runs above the false ceiling with thick insulation to prevent humidity condensing in warm transition zones.
- 2
Outdoor units sheltered from wind
Outdoor units sit on roofs in villas and buildings and need protection from Tabuk's seasonal winds and dust.
- 3
Balanced duct in commercial buildings
Hotels and government buildings in Tabuk need a balanced main duct to keep air distribution even across different floors and wings.
Before the visit
Before our visit in Tabuk
- 1
Send the drawings and measurements
Send the architectural drawings and ceiling photos before the visit, so we can estimate the duct route and branch sizes.
- 2
Confirm unit positions and outlet locations
Agree with the site engineer on the concealed unit position, outdoor unit position and outlet locations, because they determine the duct and copper lengths.
- 3
Arrange site access and unloading
Tell us the site entrance and where the duct from Jeddah can be unloaded, so it arrives on schedule and without delay.
Other services in Tabuk
FAQ
Questions about AC duct installation
Why does duct sweat and cause dampness on the ceiling?
Warm air condenses the moment it meets a cold duct surface. A site survey establishes the precise requirements based on the building's conditions and its city's climate, then we insulate with a sufficient layer of Armaflex or Kimmco with all joints sealed, raising the outer surface temperature above the dew point and stopping the sweating.
Does a longer branch deliver less air to the room?
Yes, a longer branch resists airflow more than a short one. This is why we size each branch individually, so near and far rooms receive balanced quantities of air, and we complete the adjustment with dampers during start-up.
How do you size the return-air opening?
The intake opening must be large enough so the unit does not work against negative pressure that strains it. We check the unit data and plenum requirements and decide size and position at the survey, because placing it behind a closed door or away from occupied areas changes the calculation.
Does a large room need more than one air outlet?
Usually, yes. A long majlis or a wide living room cannot be served by one outlet, because the air cools one end and leaves the other. We spread the outlets along the room, split the branch between them, and keep them away from the return grille so cool air does not go straight back to the unit.
Does the duct material affect sweating and airflow balance?
Yes. Sheet metal duct holds its shape under air pressure, so flow quantities stay as designed. Flexible duct can compress or sag, changing its cross-section and upsetting the balance. We therefore fabricate the main branches from galvanised sheet in our workshop and use flexible duct only for the shortest possible connection at each diffuser.
Do you install AC duct in Tabuk flats and villas?
Yes. We install AC duct in residential and commercial units in Tabuk, and size the branches and set the outlet positions after inspecting the site or the drawings.
How does duct made in Jeddah reach my site in Tabuk?
We fabricate the duct in our workshop to the approved sizes and lengths, supply it to your site in Tabuk, and agree the delivery and installation dates with you in the quote.
Does Tabuk's cold winter affect insulated duct?
Tabuk's cold winter does not harm the duct itself, but the difference between cold air inside and warm air in unconditioned corridors raises the risk of humidity condensation, so we choose the insulation thickness to suit the site.
When should the AC duct be run in a flat building under construction?
After electrical and plumbing runs are done and before the false ceilings go up, so the duct arrives on schedule, is fixed and tested without holding up other trades.


























































































