HVAC controls and automation in Tabuk, Tabuk Region
HVAC controls and automation in Tabuk turns buildings and facilities from manual operation to autonomous, regulated running. We are based in Jeddah and supply your Tabuk site with the controls, wiring and links between units and the central logic, so the system runs itself on the schedule and limits you set.
4.9 on Google- Zone control
- Accurate wiring
- Automatic operation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
Who needs these systems?
- 1
Villa or office with multiple zones
Bedrooms, reception rooms and offices have different hours of use. When each thermostat controls one zone, an empty room does not cool while an occupied one goes without; the survey decides the number of zones and what wiring the building needs.
- 2
A facility too large to run by hand
In warehouses, government buildings and commercial complexes, one operator cannot follow every unit. We connect the plant to a central point where the operator sees the status of each zone and intervenes without walking the building.
- 3
A system that runs irregularly
A unit left running after a room is vacated, or one that never stops at peak hours, is usually a controls problem rather than a fault in the unit. We inspect the control circuit and build on it a system suited to how the building is used.
Who it's for
Living in a villa with areas on different schedules
We fit a thermostat for each zone and wire it to its unit so bedrooms run independently from the reception area.
Ask on WhatsAppManaging a large facility that is hard to monitor manually
We connect units to a central control point so the operator sees every zone's status without walking the building.
Ask on WhatsApp
What the job covers
What the work covers
- Site survey and zoning
- Control wiring beside ducts
- Thermostat in each zone
- Units linked to central point
- Automatic operation tested per zone
How we work
How we work
- 1
Survey the building
We agree with you on zone boundaries, thermostat positions and the cable route before any work starts; the survey sets the real requirements based on building size and unit types.
- 2
Run the control cables
We route control cables neatly beside the ductwork and copper piping, keeping them away from power cables to avoid signal interference.
- 3
Fit thermostats and connect
We fix each thermostat in its agreed position, wire it to its unit, connect all units to the central control point and verify every circuit before testing.
- 4
Start up and hand over
We start each zone separately and check that each thermostat responds correctly, then show you how to monitor and adjust the zones from the central control point.
Why Alrabih?
Automatic control or manual switches?
| Alrabih | The usual way | |
|---|---|---|
| On and off | Automatic by temperature | Manual switch |
| Zones | Each zone independent | Whole building together |
| Operator view | Central control point | Walk to every unit |
| Unit left running | Stops automatically | Runs until someone notices |
| Scheduled operation | By actual occupancy | Fixed time always |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
HVAC controls and automation in cities near Tabuk
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Tabuk
What sets this city apart
Tabuk has detached villas, residential compounds, government buildings, hotels, farms and warehouses. Villas and flats benefit from independent control in each room or annex, so cold is not wasted in empty spaces. Government and farm facilities on fixed schedules need automated start and stop, beginning units before staff or livestock arrive and shutting them down at close, saving energy and maintenance.
Tabuk is a city in the north-west of the Kingdom on a desert plateau ringed by mountains, with hot dry summers and cold winters.
Government and farm buildings in Tabuk commonly run units on a fixed schedule starting before work hours and stopping at close.
The AC setup in Tabuk
- 1
Independent control per unit
In villas and residential compounds each section or annex needs its own sensor and temperature limits, so unoccupied units stay off.
- 2
Fixed schedules for facilities
Warehouses and government and farm facilities run on a set schedule, starting and stopping automatically with no daily intervention.
- 3
Control wires run with duct and copper
Control wires and sensors run alongside the duct and copper routes, protected from heat, cold and moisture along the way.
Before the visit
Before our visit in Tabuk
- 1
Send the AC unit layout
Send the location of every indoor and outdoor unit and the names of rooms or sections, so we can determine the number of sensors and wires needed.
- 2
Confirm schedules and set limits
Agree the operating hours and temperature limits for each zone or unit, and tell us before installation so we can set up the system correctly.
- 3
Arrange delivery of wires and sensors
Confirm with the site where wires, sensors and components from Jeddah will be received, and mark the duct routes that wires should run alongside.
Other services in Tabuk
FAQ
Questions about HVAC controls and automation
Does building automation suit a residential villa?
Yes, a residential villa benefits from this system because it has several zones with different use patterns between day and night. We fit a thermostat for each zone and link the units so bedrooms run independently from the reception and the kitchen. The survey sets the number of circuits needed.
How do control cables run in a finished building?
In a finished building we run cables in trunking alongside the ductwork and copper piping. Where the duct is above a suspended ceiling the route is straightforward. The survey finds the best path for each building before any cable is pulled.
Can air dampers work with the thermostats?
Yes, a motorised damper receives a signal from the thermostat, opens when the zone needs cooling and closes when the set temperature is reached. This makes zoning more precise where one duct serves several areas, and the survey sets the correct position for each damper.
Do environmental conditions affect control wiring?
The building's conditions and its city's climate make it important to use cables with a suitable outer sheath and to seal all connections firmly against oxidation, especially where routes pass near outdoor units. We account for this in how we plan the route, fix the cables and test every circuit before handover.
Can each zone be set to start and stop at set times?
Yes, a thermostat that supports scheduling allows you to set start and stop times for each zone separately. This is particularly useful in offices and facilities with fixed working hours. The survey determines the right thermostat type for each zone based on the unit type and wiring method.
Do you install automated controls in villas and government facilities in Tabuk?
Yes. We install control and automation systems in villas, flats, government buildings, farms and hotels in Tabuk, and design the logic, schedules and limits to fit each building's needs.
You are based in Jeddah, so how does the control wiring reach my site in Tabuk?
We design the control systems and wiring to follow the duct and copper route at your site, supply the wires, switches and sensors to Tabuk and install them there, and agree delivery and installation dates with you in the quote.
Does Tabuk's cold winter affect the control systems?
Severe winter cold can affect sensors and wires in unprotected areas, so we protect the wires and connections from frost and moisture, and choose sensors and components suited to each site's conditions.
When should controls and wiring go into a government building under construction in Tabuk?
After all AC units, duct and copper are installed, before system testing and handover, so automation works from day one. We set the timing with you and the site engineer.


























































































