Restaurant & cafe HVAC in Tabuk, Tabuk Region

Restaurant and cafe HVAC in Tabuk faces a dual challenge: intense kitchen heat in summer and the need for a cool, welcoming dining room. We design and install air conditioning systems that isolate the heat source from guests, extract cooking fumes and odours efficiently, and keep diners comfortable year-round.

4.9 on Google
  • Pressure balance
  • Make-up air
  • Coil protection

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When your restaurant needs a specialist

  1. 1

    Kitchen smells reaching diners

    When the extract hood pulls out more air than is replaced, the kitchen goes negative and draws air from the dining room, bringing smells with it. The answer is calculating the volumes and delivering make-up air close to the hood.

  2. 2

    Dining room stays warm despite the AC

    A full dining room raises the heat load noticeably, and design must account for the building's conditions and its city's climate at peak occupancy. The right diffuser layout achieves even cooling across tables, not cold near the duct and warm in the corners.

  3. 3

    Repeated breakdowns in kitchen AC units

    Grease vapour from the burners settles on evaporator coils and blocks airflow, raising pressure and stressing the compressor. Placing the unit away from grease currents and scheduling coil cleaning reduces this damage significantly.

Who it's for

  • Opening a new restaurant that needs a full HVAC system

    We design the cooling and make-up air system from scratch to match your kitchen and dining layout before you open.

    Ask on WhatsApp
  • Your restaurant is running but smells are reaching the tables

    We survey the existing system, measure pressure between kitchen and dining, then correct the fault by adding make-up air or adjusting the air balance.

    Ask on WhatsApp

What the job covers

What the work covers

  • Kitchen and dining pressure survey
  • Make-up air for hood
  • Diffuser layout for dining
  • Ductwork to SMACNA standards
  • Air balance commissioning
Request a quote

How we work

How we work

  1. 1

    Site and kitchen survey

    We visit, measure the spaces, review the existing extract hood and burner positions, and find where negative pressure is occurring before any design work.

  2. 2

    Design and equipment selection

    We design the make-up air and cooling systems together, and select units from Carrier, YORK, General, Midea, Gree or Smart Gold to suit the space and the load.

  3. 3

    Duct fabrication and installation

    We fabricate ducts in our workshop from G90 galvanised sheet to precise sizes, install the units, and insulate the pipework with Armaflex. We supply copper runs of up to 30 metres without welded joints.

  4. 4

    Balancing and handover

    We run the system and adjust dampers until the kitchen sits at slight negative and the dining room at slight positive, confirming that doors open easily and no kitchen smell crosses to the guests.

Start with step one

Why Alrabih?

Integrated design or separate units with no balance?

AlrabihThe usual way
Make-up airCalculated and delivered to the hoodUsually not addressed
Dining pressureSlight positive, no smell transferNegative, pulls kitchen air in
Coil protectionUnit placed away from greaseRepeated breakdowns
Cooling spreadDiffusers sized for full occupancyUneven, warm corners
Kitchen ductworkFabricated in-house from G90 sheetOff-the-shelf sizes, poor fit
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Restaurant & cafe HVAC in cities near Tabuk

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Tabuk

What sets this city apart

Restaurants and cafes in Tabuk range from small shops in residential buildings to standalone establishments. The kitchen is always an intense heat source, and the extract hood and fans must remove fumes and grease before they spread into the cafe. Air leaking from kitchen to restaurant means lost cooling and odour escape, so we install engineering barriers and balance the pressure between zones. Some cafes have outdoor seating, which needs separate cooling or ventilation fans.

Tabuk is a city in the north-west on a desert plateau ringed by mountains, with very hot summers and cold winters.

A cafe HVAC system in Tabuk requires a powerful kitchen extract and a separate design to return cold air to the dining room without odour or heat bleed-back.

All our services in Tabuk

The AC setup in Tabuk

  1. 1

    Kitchen extract with independent duct

    The extract hood removes fumes and grease from the kitchen directly outside through an insulated duct, with no contaminated air returning to the cafe.

  2. 2

    Negative pressure in the kitchen

    The kitchen should be at lower pressure than the cafe, so cool air is drawn in from the dining room and fresh air from outside, not the reverse.

  3. 3

    Cooling or ventilation units for outdoor seating

    Some Tabuk cafes have outdoor seating that needs water-cooled fans or separate ventilation units independent of the main cafe system.

Before the visit

Before our visit in Tabuk

  1. 1

    Send a layout drawing of kitchen and cafe

    Send a sketch showing the hood, stove and tables, so we can design the duct route and air balance before our visit.

  2. 2

    Confirm the extract hood outlet

    Agree with the cafe owner where the extract duct exits (roof or exterior wall), because it determines the duct length and angle.

  3. 3

    Clarify make-up air access

    Make sure there is an opening or door for make-up air to reach the kitchen (usually the entrance or a low grille), so pressure does not drop too much.

FAQ

Questions about Restaurant & cafe HVAC

What is the difference between make-up air and kitchen air conditioning?

Make-up air replaces the volume the hood extracts, its purpose is pressure balance not necessarily cooling. Kitchen air conditioning tackles burner heat and lowers temperature for the staff. Both may be needed, and the site survey determines which your kitchen requires.

Do outdoor seating areas need a different approach?

Yes. Fans alone are not enough during peak months in most Saudi cities. The right option depends on whether the space has an open roof or a partial enclosure and how large the area is. We assess the spot and propose suitable units after the site survey.

How are AC coils protected from kitchen grease?

The first step is design: we position kitchen units in airflow paths away from the grease rising off the burners. In preventive maintenance contracts we schedule pressure coil cleaning before build-up raises stress on the compressor, because early cleaning is simpler and less costly than a repair.

Can existing ductwork in an operating restaurant be repaired or does it need replacing?

The decision follows a duct inspection: we look for air leaks, grease build-up inside, and sheet corrosion assessed against the building's conditions and its city's climate. If the structure is sound we seal joints with Foster sealants and re-insulate with Kimmco. If not, we fabricate new sections in our workshop and replace the damaged runs.

Does a packed dining room during peak season affect how the AC performs?

Yes, every person in the room adds heat, and this effect is more pronounced during peak season when temperatures are high. Design therefore accounts for full occupancy load, not average attendance, and diffusers are positioned to deliver even cooling across all tables. The exact layout is confirmed after the site survey.

How do you separate kitchen and dining room air conditioning?

We design pressure barriers between kitchen and cafe: the extract hood removes fumes and grease from the kitchen to outside, and the main system supplies cool clean air to the dining room. Make-up air enters the kitchen from low grilles, so odours do not drift back to diners.

Tabuk gets very hot in summer, does the duct need special insulation?

Yes. The intense summer heat calls for tight insulation of the duct, especially in unconditioned spaces or on sun-exposed runs. We choose the insulation thickness and route after surveying the site.

Do you supply extract hoods and ductwork to Tabuk?

We supply duct and metal branches from our Jeddah workshop to your site in Tabuk, and agree the delivery and installation dates in the quote. Commercial hoods and equipment are specified with the engineer based on kitchen size.

Can you set up air-conditioned outdoor seating at a Tabuk cafe?

Yes, if the seating is in a wind-protected or shaded area, we can install cooling fans or separate ventilation units. We decide the solution after surveying the space and local conditions.

Keep your dining room away from the kitchen

WhatsApp a floor plan or photos of your kitchen and dining room and we will arrange a survey in your district, Saturday to Thursday, eight in the morning to eight at night.

CallWhatsApp