Testing and commissioning in Hail, Hail Region

Testing and commissioning air-conditioning systems in Hail verifies every unit's operation and balanced airflow across all spaces before handover. We check pressure, leaks and vacuum, measure temperatures in every room, adjust controls, and give you a complete record.

4.9 on Google
  • Line test
  • Air balance
  • Controls set

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When commissioning becomes necessary

  1. 1

    A new system before handover

    The contractor has finished and handover is due. Before the owner signs off, you need confirmation that the line is tight, the ductwork distributes air evenly and the thermostat controls the system as designed. No earlier stage replaces this step.

  2. 2

    A major change to an existing system

    Rooms have been added, a large duct section replaced or the central unit changed. A major modification shifts the pressure and airflow balance across the whole system and calls for a full test as if it were new.

  3. 3

    Rooms that cool unevenly

    Some rooms are too cold while others barely cool, even though the system runs. The cause is usually dampers that were never balanced or air outlets sized for a different room, both of which are corrected during the balancing stage of commissioning.

Who it's for

  • Your new villa is ready for contractor handover

    We test the refrigerant line, ductwork and every air outlet, set the dampers and check the thermostat before you accept the system from the contractor.

    Ask on WhatsApp
  • You have added floors and modified the AC system

    A major modification shifts balance across the whole system. We test pressure and airflow and reset every damper across all zones.

    Ask on WhatsApp

What the job covers

What the commissioning covers

  • Line pressure and vacuum test
  • Electrical circuits and protection checks
  • Air temperature at every outlet
  • Damper adjustment for room balance
  • Thermostat and control panel check
Request a quote

How we work

How we work

  1. 1

    Pre-start check

    Before start-up the technician checks copper joints, ductwork connections and wiring, and confirms insulation is intact and ducts are clear. A fault found before start-up is far easier to correct than one found after.

  2. 2

    Line test

    We pressurise the refrigerant line and watch the reading to confirm no leak, then vacuum the line to remove air and vapour, hold the reading steady, and only then release the refrigerant.

  3. 3

    First start-up and airflow

    We start the system and measure the air temperature at every outlet, then adjust each damper until the rooms reach the temperatures the system was designed to deliver.

  4. 4

    Controls check and handover

    We test the thermostat and any control panel, confirm the system responds to every command, then show the owner how to set the thermostat and the right setting for each room before we hand the system over.

Start with step one

Why Alrabih?

Planned commissioning or a quick switch-on?

AlrabihThe usual way
Leak testPressure and vacuum testStart-up with no test
Room balanceEach damper measured and setUneven cooling left as is
Electrical checkProtections and wiring reviewedOnly visual power-on
ControlsThermostat set and testedLeft on its first setting
Plenum boxDistribution checked from plenumNot checked
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Testing and commissioning in cities near Hail

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Hail

What sets this city apart

In Hail, between the Aja and Salma mountains, there are villas, residential and government apartment buildings, farms, livestock facilities, schools and hotels. Each needs different commissioning: villas and flats need precise cooling balance between rooms, schools and government buildings need high cooling capacity and stable flow, farms and facilities may need seasonal cooling. We commission each system for its use.

Hail is a northern city between the Aja and Salma mountains, with very hot summers and cold winters.

When commissioning in Hail we verify pressure and flow stability in large systems for schools and government buildings, and balance cooling between wings and rooms.

All our services in Hail

The AC setup in Hail

  1. 1

    Balancing cooling between school wings

    Schools in Hail span multiple wings; we adjust dampers and duct so cool air reaches every classroom and hall evenly without variation.

  2. 2

    Checking insulation through cold and heat

    Hail has cold winters and very hot summers; pipes and duct need robust insulation. We inspect its thickness and integrity before actual commissioning.

  3. 3

    Testing high loads for government buildings

    Government buildings, schools and hotels in Hail need powerful systems; we test them under full cooling loads before handover.

Before the visit

Before our visit in Hail

  1. 1

    Gather drawings for all systems

    Send duct, pipe and indoor and outdoor unit drawings for every wing or section, so we know the number of units, lengths and areas we will test.

  2. 2

    Confirm who runs the building and the engineer

    Give us the site engineer and the operations and maintenance manager, so we can coordinate the commissioning schedule and handover.

  3. 3

    Prepare the site and equipment

    Confirm all equipment, pipes and wiring are installed and secured, electrical power and earth are available, and the building is safe for measurement and testing.

FAQ

Questions about Testing and commissioning

What is the difference between installation and commissioning?

Installation means fitting and connecting the parts. Commissioning comes after, to confirm that what was fitted works as designed: the line is tight, air reaches every room in the right quantity and the thermostat controls accurately. The two stages are different and neither replaces the other.

Does a small building need full commissioning?

Building size does not decide whether commissioning is needed. Even in a small flat or villa there may be a refrigerant leak or a damper that leaves one room far colder than another. The site and the system design decide the scope of testing required, and that becomes clear at the survey.

Why do you rely on a stable vacuum reading rather than a fixed time?

The amount of vapour trapped in a refrigerant line varies from one site to another depending on the building's conditions and its city's climate. Vapour left in the line gradually strains the compressor and weakens cooling. We therefore run the vacuum pump until the reading reaches a stable level, and only then open the refrigerant.

What if one room is still warmer after commissioning?

We go back to the air temperature at that room's outlets, check the damper and the flexible duct that feed it, and confirm the air outlet suits the room's size. Adjusting the damper is usually enough; if the cause lies in the system design itself, we explain the right solution before any further work.

Do flexible duct connections need checking during commissioning?

Yes. A flexible duct connecting a rigid duct run to an air outlet can crack or partly detach during installation without being obvious. That gap reduces air reaching the room and makes balancing readings unreliable. The technician therefore inspects every flexible duct connection before measuring airflow at the outlets.

How do you commission a large cooling system in a school or government building in Hail?

We test pressure, leaks and vacuum, run all indoor and outdoor units together, measure temperature and airflow in each hall and wing, adjust dampers for even cooling, and test the control system and thermostats on all zones.

Do you inspect copper pipes and insulation in Hail's large systems?

Yes, we inspect every copper joint for leaks and verify insulation on pipes and duct, especially where they cross roofs or unconditioned spaces, because Hail's extreme cold and heat need tight insulation.

When do we start commissioning in a government project in Hail?

After installation, electrical connections, earthing and final cleaning are complete, before the government department takes over the building. We agree the date with the contractor and engineer before starting.

Do you record test results and temperature and airflow readings for every room?

Yes, we record leak and vacuum pressure, temperature and airflow in every wing and room, damper and control settings in a complete record that the responsible party keeps.

Hand over your system after a full test

WhatsApp a brief description of the system and building type, or call us, and we will arrange the survey and commissioning visit, Saturday to Thursday.

CallWhatsApp