Testing and commissioning in Tabuk, Tabuk Region

Testing and commissioning air-conditioning systems in Tabuk confirms every unit works efficiently before handover, from pressure and leak checks to temperature readings in every room. We test the entire system, balance the airflow between rooms, and give you a handover record to keep.

4.9 on Google
  • Line test
  • Air balance
  • Controls set

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When commissioning becomes necessary

  1. 1

    A new system before handover

    The contractor has finished and handover is due. Before the owner signs off, you need confirmation that the line is tight, the ductwork distributes air evenly and the thermostat controls the system as designed. No earlier stage replaces this step.

  2. 2

    A major change to an existing system

    Rooms have been added, a large duct section replaced or the central unit changed. A major modification shifts the pressure and airflow balance across the whole system and calls for a full test as if it were new.

  3. 3

    Rooms that cool unevenly

    Some rooms are too cold while others barely cool, even though the system runs. The cause is usually dampers that were never balanced or air outlets sized for a different room, both of which are corrected during the balancing stage of commissioning.

Who it's for

  • Your new villa is ready for contractor handover

    We test the refrigerant line, ductwork and every air outlet, set the dampers and check the thermostat before you accept the system from the contractor.

    Ask on WhatsApp
  • You have added floors and modified the AC system

    A major modification shifts balance across the whole system. We test pressure and airflow and reset every damper across all zones.

    Ask on WhatsApp

What the job covers

What the commissioning covers

  • Line pressure and vacuum test
  • Electrical circuits and protection checks
  • Air temperature at every outlet
  • Damper adjustment for room balance
  • Thermostat and control panel check
Request a quote

How we work

How we work

  1. 1

    Pre-start check

    Before start-up the technician checks copper joints, ductwork connections and wiring, and confirms insulation is intact and ducts are clear. A fault found before start-up is far easier to correct than one found after.

  2. 2

    Line test

    We pressurise the refrigerant line and watch the reading to confirm no leak, then vacuum the line to remove air and vapour, hold the reading steady, and only then release the refrigerant.

  3. 3

    First start-up and airflow

    We start the system and measure the air temperature at every outlet, then adjust each damper until the rooms reach the temperatures the system was designed to deliver.

  4. 4

    Controls check and handover

    We test the thermostat and any control panel, confirm the system responds to every command, then show the owner how to set the thermostat and the right setting for each room before we hand the system over.

Start with step one

Why Alrabih?

Planned commissioning or a quick switch-on?

AlrabihThe usual way
Leak testPressure and vacuum testStart-up with no test
Room balanceEach damper measured and setUneven cooling left as is
Electrical checkProtections and wiring reviewedOnly visual power-on
ControlsThermostat set and testedLeft on its first setting
Plenum boxDistribution checked from plenumNot checked
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Testing and commissioning in cities near Tabuk

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Tabuk

What sets this city apart

Tabuk has villas, apartment buildings, commercial and government buildings, warehouses and hotels. Each type needs different commissioning checks: a villa requires balancing the cooling between rooms, a warehouse or hotel calls for testing circulation and pressure over longer distances. We inspect every thermal zone and measure temperatures and humidity immediately after installation.

Tabuk is a north-western city on a desert plateau ringed by mountains, with very hot summers and cold winters.

When commissioning in Tabuk we check outdoor condenser performance in the extreme heat and verify insulation integrity on sun-exposed pipes and duct.

All our services in Tabuk

The AC setup in Tabuk

  1. 1

    Testing condensers in extreme heat

    In Tabuk we test outdoor units under peak cooling loads to ensure they maintain correct pressure and flow despite the extreme heat.

  2. 2

    Checking insulation on exposed surfaces

    Pipes and duct running across Tabuk roofs or unconditioned spaces need thick insulation; we inspect it and only start operations after confirming it is intact.

  3. 3

    Balancing cooling in villas and apartment blocks

    We adjust dampers in the duct so cold air reaches every room evenly, and measure temperature in each zone before handover.

Before the visit

Before our visit in Tabuk

  1. 1

    Send the system layout drawing

    Send the duct, pipe and indoor and outdoor unit layout before the visit, so we know the pipe and duct lengths and insulation we will check.

  2. 2

    Prepare the site for access and measurements

    Ensure the building is safe to enter and that roofs and unconditioned spaces with equipment are safe to work on and measure.

  3. 3

    Coordinate with the electrician and contractor

    Give us the electrician and contractor names and contact details so we can coordinate on the safety of connections and earthing before testing.

FAQ

Questions about Testing and commissioning

What is the difference between installation and commissioning?

Installation means fitting and connecting the parts. Commissioning comes after, to confirm that what was fitted works as designed: the line is tight, air reaches every room in the right quantity and the thermostat controls accurately. The two stages are different and neither replaces the other.

Does a small building need full commissioning?

Building size does not decide whether commissioning is needed. Even in a small flat or villa there may be a refrigerant leak or a damper that leaves one room far colder than another. The site and the system design decide the scope of testing required, and that becomes clear at the survey.

Why do you rely on a stable vacuum reading rather than a fixed time?

The amount of vapour trapped in a refrigerant line varies from one site to another depending on the building's conditions and its city's climate. Vapour left in the line gradually strains the compressor and weakens cooling. We therefore run the vacuum pump until the reading reaches a stable level, and only then open the refrigerant.

What if one room is still warmer after commissioning?

We go back to the air temperature at that room's outlets, check the damper and the flexible duct that feed it, and confirm the air outlet suits the room's size. Adjusting the damper is usually enough; if the cause lies in the system design itself, we explain the right solution before any further work.

Do flexible duct connections need checking during commissioning?

Yes. A flexible duct connecting a rigid duct run to an air outlet can crack or partly detach during installation without being obvious. That gap reduces air reaching the room and makes balancing readings unreliable. The technician therefore inspects every flexible duct connection before measuring airflow at the outlets.

What does testing and commissioning before handover in Tabuk include?

We test pressure, leaks and vacuum, then start the system and clean filters, measure temperature and airflow in every room, adjust dampers to balance cooling, and set controls and thermostats before handover.

Do you test the pipes, duct and insulation during commissioning in Tabuk?

Yes, we check the joints and potential leaks in pipes and duct, and inspect the insulation especially where the duct crosses a roof or an unconditioned space, because Tabuk's intense sun requires tight insulation.

When does commissioning happen in a residential or commercial project in Tabuk?

After installation and electrical connections and earthing are complete, before the building is occupied. We set the date in the quote according to the project schedule.

Do you give the owner a record with the test results?

Yes, we give you a complete commissioning record with pressure, leak and vacuum readings, temperature in every room, damper and control settings, which you keep for reference.

Hand over your system after a full test

WhatsApp a brief description of the system and building type, or call us, and we will arrange the survey and commissioning visit, Saturday to Thursday.

CallWhatsApp